Worth a browse .....
Cheers
'Nutz
http://www.gizmodo.com.au/2010/09/tr...o+Australia%29
Worth a browse .....
Cheers
'Nutz
http://www.gizmodo.com.au/2010/09/tr...o+Australia%29
Thats not a speaker ......*That's* a Speaker !
(With apologies to Michael J. "Crocodile" Dundee)
The more I see them ,quirky as they are ,the do have a beauty. You also got to take you hat off to the craftsmanship.....
Someone suggested the were a K2 knock off . I would say thats a tad horn a more in the style of the Exclusive 2402
Rich
another link, if anyone else is interested in some reading
http://www.6moons.com/industryfeatur.../olympian.html
The mid horn looks like a modern version of something Vitavox (the precussor to Living Voice according to the 6moons article) has had for over 50 years. I started a thread in the general audio forum asking about the origin of this design that often gets called a TAD or Yuichi horn.
(I attached a pic of the Vitavox licensed Klipshorn built and sold in the UK in the mid 1950s, showing the Vitavox radial horn with the vanes near the throat.)
I spoke to the man behind the speaker design earlier this week .... The Tad is obvious , Ale CD, Vitaox 151 15 " woofer .... 60 Htz up to whatever the 703 can handle .
I did not wish to ask too many details about the crossover FQ's .....
I spent about an hour talking to a real down to earth gentleman , a gent that shares the enthusiasm and excitement that a lot of us here share . Not at all one of those hifi snobs . I managed to get myself an invite up to meet him and them while drinking some tea . Its in a part of the UK that my family originates .
I will see if he will share a little more about his speakers and post a proper thread .
Rich.
PS , they are nothing like the K2 . These speakers have their own lineage dating back some 50 years .
I look forward to reading about what the builder has to say about these. They are unique looking, but a pair will set you back as much as 4 pairs of JBL D66000s. Yet I don't doubt for minute that they'll sell more than a few pairs!
BTW, I don't think the mid horns are TAD or TAD copies (with 3 instead of 4 vanes), but very much the other way around. I think Living Voice make them, perhaps to the same design as the old Vitavox CN157 cast horn. A TAD driver looks to be used with the brass horn. I'd really like to know why the upper tweeter is mounted at an angle.
All kidding aside, we saw (and heard) some high end monsters at the July 2011 Audio Fest -
These MBL speakers were lush extremely detailed and very exotic looking as well ...
Like Daleks on parade ...
beautiful lacquer paint jobs on the speakers and amps,
gorgeous gold accents on the massive monoblock amps
...but no billet horns
http://www.mbl-usa.com/Browse.aspx/389/Reference-Line
2ch: WiiM Pro; Topping E30 II DAC; Oppo, Acurus RL-11, Acurus A200, JBL Dynamics Project - Offline: L212-TwinStack, VonSchweikert VR-4
7: TIVO, Oppo BDP103D, B&K, 2pr UREI 809A, TF600, JBL B460
I never thought the "billet proof" movement would make it out of the hotrod domain and into the audio philos domain. Will you at least bring the suicide girls? Wait, your not going to go down the "rat stereo" path are you? Oh I can see it all now, exposed motor start capacitors and magnet wire at the speakers and raw frame organ and or console tube amps,,,
If we knew what the hell we were doing, we wouldn't call it research would we.
Rat-rod, steam-punk stereos... LOL... there's a latent market (or not so latent anymore).
If those are the speakers I'm thinking about, they have sort of a steampunk look already.
My main concern is TAD's ostentatious use of billet aluminum for the tweeter horns when a nice thermoplastic would have done the same thing.
2ch: WiiM Pro; Topping E30 II DAC; Oppo, Acurus RL-11, Acurus A200, JBL Dynamics Project - Offline: L212-TwinStack, VonSchweikert VR-4
7: TIVO, Oppo BDP103D, B&K, 2pr UREI 809A, TF600, JBL B460
My statement of interest was referring to the veneer work - that's done by hand. As someone who's interested in woodwork I appreciate fine craftmanship when I see it. Whether it's worth the cost...that's another matter entirely. I'm under no illusion that there's a correlator between cost and performance when something like this is concerned. Nor do I care to win friends and influence people by a vulgar display of oppulence. But it doesn't stop me appreciating art for art's sake.
Apologies to those offended by my particular artistic sensibilities.
Wood's fine. It's that freakin' aluminum that'll get you in trouble.
These cabs remind me of this guy......
There are currently 1 users browsing this thread. (0 members and 1 guests)