Inline Fuses - L100

[sweatsuit]

I just purchased a Marantz 2270 and a pair of JBL L100's. Someone on another board suggested that I run inline fuses between the two. Is this necessary/suggested?

[brutal]

I just purchased a Marantz 2270 and a pair of JBL L100's. Someone on another board suggested that I run inline fuses between the two. Is this necessary/suggested?

If the gear doesn't have speaker protection and is know to go DC on occasion, it's a wise move.

[sweatsuit]

Would I use a fuse holder like below on all four speaker cords along with 1.5 amp fast blow fuses, based on the L100's 50 watt rating??

http://www.parts-express.com/pe/show...number=071-500

[brutal]

Would I use a fuse holder like below on all four speaker cords along with 1.5 amp fast blow fuses, based on the L100's 50 watt rating??

http://www.parts-express.com/pe/show...number=071-500

That would work if you want to mount something. There's also options like this: http://www.napaonline.com/Search/Det...01_0282424653#

You only need it on the + side line.

Fuse size = square root of speaker max continuous power/speaker impedance

I=√50/8

=2.5A so I'd probably go 2A to be safe. 1.5A may be popping if you push it a lot.

Also remember the L100 ratings were conservative and standard different then so they'll take more "modern" rated power.

[sweatsuit]

Great, thanks so much for the info!