Can anyone tell me if there is a significant difference in sound between a 4333 studio monitor and the L300?
Can anyone tell me if there is a significant difference in sound between a 4333 studio monitor and the L300?
4333's are rectangular boxes that were easily worked into a studio's design... L300's are the same components on a front panel slanted to JBL's feeling of how they would work the best in a home setting. There is no difference in the way they sound. It's the way you point them. Tilt an L300 foreward and it sounds like a 4333. Tilt a 4333 back and it sounds like an L300.
Tims pretty much dead on with his answer. If both are at the same price you go for the L-300s as the resale will be better. Other than what has been noted earlier they are the same. The drivers are the same other than being a pro version.
But you can bi-amp the 4333, not so with the L300. (unless one make a new xover)
Yes it was!
I was mulling pulling the trigger on some L300s about two-years ago and had watched the price climb over the preceding few years to where roughly $3000 bought a nice pair of L300s and a bit less would score some excellent-condition 4333s. So instead I took the same money and poured it into my 4345 clones.
I vividly remember $1200 L300s, and knowing how fast they climbed gave me the incentive to get off the pot. Of course that may have been the top of the market, too. Now with JBL the off-shore company that it is, I keep waiting for those vintage prices to plummet, though I'm not holding my breath.
". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers
Do we feel that the brand is so tarnished it will bring down the prices of the vintage gear? In this case the L300's. Did Altec vintage gear plumet, Acurus, etc?
Well why not it's just one more pair...
4340's and 250ti's what an odd pair...
I'm not real sure that Harman could ever do anything to eff up the value of JBL legacy systems that remain in good condition.
I do believe that they have fatally wounded the brand going forward.
And I wouldn't be surprised if all those Made in the U.S.A. Everest II's just had their value set in stone.
There are currently 1 users browsing this thread. (0 members and 1 guests)