Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: 2214H 4" dust caps

  1. #1
    Regis
    Guest

    2214H 4" dust caps

    If any of you kind gentlemen can provide some insight into this, I'd appreciate it. One of the 2214H's (Pro) I purchased has a badly dented dustcap, but is in otherwise excellent condition.

    I called JBL Pro Parts and they only have one part number for their version of the 2214H, which I'm sure is the 3" dustcap as that's what they came with. He told me I'd have to call the NY office or go the website. The website for parts only has the complete woofer.

    Anybody have a P/N for the 4" dustcap and a phone number for this? Man, I flogged the Pro site and found the 4425 data and the home site for the tech data on the L-100T, but no dustcap number!

  2. #2
    Dang. Amateur speakerdave's Avatar
    Join Date
    May 2003
    Location
    Northern California
    Posts
    3,735
    21060-MS Dust dome spares $2.25

    Is this the number you have? Doesn't say the size.

  3. #3
    Regis
    Guest

    That's good

    ...because that wasn't the PN the Pro guy gave me. It was a 33535 or something like that. Not like that one at all, so that must be the home version (4" I hope). I'll call JBL NY tommorow. Thanks for the help!

  4. #4
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    The 2214H is a Pro driver that was also used in several Home systems.
    It has a 3-inch dust cap, P/N 31385. This dust cap is also used on:
    LE10H
    LE10H-1
    MI-15
    LE111A
    LE111H
    112A
    112H
    122A
    122A-1
    123A
    123A-1
    123A-3
    126A
    128H
    128H-1
    129H
    PR300
    2108
    2108H
    2122H
    2212
    2213
    2213H

    4-inch dust cap P/N 21514 is used on:
    LE14A
    LE14H
    LE15A
    LE15B
    LE15H
    PR15
    PR15F
    PR15R
    123A-2 (inverted)
    150-H
    2121 (inverted)
    2121H (inverted)
    2215
    2215A
    2215B
    2215H
    2216
    2290

    4-inch dust cap P/N 50201 is used on:
    LE14H-1
    PR15C
    PR15D
    M45
    M45-4
    M45-8
    M45-16
    M46-8
    M46-16
    M51-4
    116A (inverted)
    116H (inverted)
    121A
    121H
    124A
    124H
    125A (inverted)
    127A (inverted)
    127H (inverted)
    135A
    136A
    136B
    136H
    E145-8
    E145-16
    K145
    K145-4
    K145-16
    K151-8
    K151
    K151-4
    K151-16
    2203A
    2203H
    2204H
    2205A
    2205B
    2205C
    2205H
    2205J
    2225H
    2225J
    2230A
    2231A
    2231H
    2234H
    2235H
    2240G
    2240H
    2245H

    Hope this helps...
    Last edited by 4313B; 07-12-2004 at 05:32 PM.

  5. #5
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    Originally posted by speakerdave
    21060-MS Dust dome spares $2.25

    Is this the number you have? Doesn't say the size.
    Used on:
    D15S
    M20
    M21
    M21-4
    M21-16
    M22-8
    M22-16
    M30
    M31
    M31-4
    M31-16
    M32-4
    M32-8
    M32-16
    M35-4
    M40
    M41
    M41-4
    M41-16
    M42-8
    M42-16
    M55-8
    D120
    D120F
    D120F-2
    D120F-6
    E120-8
    E120-16
    K120
    K120-4
    K120-16
    D130
    D130F
    D130F-2
    D130F-6
    D130H
    E130-4
    E130-8
    E130-16
    K130
    K130-4
    K130-16
    D131
    D131F
    D140F
    D140F-2
    D140F-6
    E140-8
    E140-16
    K140
    K140-4
    K140-16
    E155-4
    E155-8
    2130
    2135

  6. #6
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    Originally posted by Robh3606
    Smart Ass

    Rob
    It's for the cause man.

  7. #7
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    8,200
    Smart Ass

    Anything for the cause!

    Rob
    Last edited by Robh3606; 07-12-2004 at 05:28 PM.

  8. #8
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    Speaking of smart asses - JBL just sent me some replacement 2121 dust caps in a padded envelope. Three guesses as to their condition upon arrival.

  9. #9
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963
    BWAAAAHAHAAAAAA!!!!


  10. #10
    Senior Moment Member Oldmics's Avatar
    Join Date
    Apr 2003
    Location
    Between Venus and Mars
    Posts
    872

    Three guesses as to their condition upon arrival.

    Guess #1-Perfect Condition

    Guess #2- Compleatly Destroyed

    Guess #3-Inverted ???,Courtesy of the shipper so that you will not have to invert them yourself upon installation ?

  11. #11
    Senior Member andresohc's Avatar
    Join Date
    Dec 2003
    Location
    Near Madison WI
    Posts
    369

    Regarding dustcap

    Regis, I just refoamed a pair of 2214H and put new dustcaps on them. I took the speaker to OCS and they couldnt come up with the same size cap and suggested I use the one a size up. After preparing the speaker I think I found out why. When I removed the other caps, the cone continues down to about a one inch vent at the center, most of the speakers I reconed the cap goes to the width of the voice coil and the pole piece is uncovered. On this speaker I couldnt clean off the old part of the cap on the cone without damaging the cone so I went a size up and covered the other cone remnants(about 1/4inch over). Also if you havent removed the cap yet, because the cone extends below the cap glue, you have to be careful to cut shallow or parallel to the cone surface or the best of both not to cut the cone underneath. I didnt know that but got lucky on the first one I opened.

  12. #12
    Senior Seņor boputnam's Avatar
    Join Date
    Apr 2003
    Location
    northern california
    Posts
    6,142
    Done.
    bo

    "Indeed, not!!"

  13. #13
    Regis
    Guest

    'preciate the help...

    ... Giskard for the P/N's. I'll go with the 4"rs and the safe route as Andre has. The woofers are on their way and since it was an Ebay purchase, what I've started doing is not only checking the feedback, but looking at what exactly the seller has shipped. So far, so good as this guy has shipped 32" TV's, big Guitar Amps and other heavy but delicate items. Then I go a step further and ask them to pack it very carefully.

  14. #14
    Junior Member
    Join Date
    Oct 2005
    Posts
    3

    need Help

    Hello.

    At me such problem., a code back I have bought where that in Germany JBL l 220. As they are heavy enough, I have asked
    снить from them all speakers of a bass and to pack separately. And one year at me stand JBL L220, without speakers. The box with speakers was lost it is not known where. Who can prompt my where I can buy 2х LE14-h and 2х PR15D. Thank if who that will help.

    With best regards Podkin Sergei.


  15. #15
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    Quote Originally Posted by Giskard


    127A (inverted)
    127H (inverted)

    Hope this helps...
    Respectfully....I don't think these drivers had an inverted dustcap. Only when using the C8R127A to recone a 125A. Not trying to 'dis the master.
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Capacitors...
    By lpd in forum Lansing Product Technical Help
    Replies: 145
    Last Post: 06-14-2007, 07:16 AM
  2. Cloning the 4435 network
    By MikeM in forum Lansing Product Technical Help
    Replies: 11
    Last Post: 11-10-2004, 01:35 PM
  3. dust caps for tweeters in L-100s
    By rcpmac in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 11-10-2003, 06:42 PM
  4. Replacing dented dust caps
    By Royd in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 09-15-2003, 11:20 AM
  5. Bypass caps in 3103 network
    By boputnam in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 07-26-2003, 08:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •