Results 1 to 7 of 7

Thread: JBL L110 refoam/recone (noob alert)

  1. #1
    Junior Member
    Join Date
    Jan 2010
    Location
    Croatia
    Posts
    10

    JBL L110 refoam/recone (noob alert)

    I've decided to repair my dad's JBL L110. They have been sitting in the storage for close to 20 years, due to the fact that the foam failure.

    now I've decided to fix them, but I have a couple of things on my mind first.


    I'm not sure weather I should only refoam them or do a complete service and recone them(how do I know that's necessary)?


    also, I've been through this forum, and many other sites, and I cant find the kit for the mentioned model. (I only need to repair the woofers, the rest seems fine).


    I see you guys mention a couple of names here and there, but none have a L110 designated kits, so would any other kit be compatible. I hope the people who had experience with L110 refoam will answer, since I see quite a lot of you have them. To bad none of you guys said which kit u used

  2. #2
    Member
    Join Date
    Feb 2008
    Location
    KC
    Posts
    41
    Often mentioned is Rick Cobb a.k.a. looneytune2001 from e-auction site

    BEST Speaker Foam kit for JBL ... would be the kit for your LE111,s

  3. #3
    Senior Member LRBacon's Avatar
    Join Date
    Aug 2006
    Location
    Pacific Northwest
    Posts
    306
    Check out this thread for recone kits:

    http://audioheritage.org/vbulletin/s...ist#post260439


    There is also a JBL recone kit goes into list that also lists prices.
    Larry

  4. #4
    Junior Member
    Join Date
    Jan 2010
    Location
    Croatia
    Posts
    10
    thanks.
    So LE111A or LE111H is the kit I need. Any difference between the 2, and how do I know which one I have?

    also, how do I know if my "spider" needs replacing?
    Thanks for the Rick Cobb link, I already saw you guys mentioning him, but he appears to have foams only. Does he have the whole cone/spider kit?

    also what do these "JBL original" parts come with?, and do you think it's worth it (200-250$ is kinda expensive)

  5. #5
    Senior Member rdgrimes's Avatar
    Join Date
    Aug 2008
    Location
    New Mexico, USA
    Posts
    2,216
    If they've been sitting for years with no foam at all, they prolly need re-cone since the spider and VC will be damaged. If they still had 50% of their foam intact there's hope. Photos would help get you an opinion.

  6. #6
    Junior Member
    Join Date
    Jan 2010
    Location
    Croatia
    Posts
    10
    I'm now at colledge so I cant take the photos, but I'll post them in a few weeks when I get home.
    I'm just doing my homework before I screw something up
    they were completely "defoamed" by my father who was fiddling around with them back when they first cracked


    by, VC you mean voice coil? damaging it doesnt sound so promising

  7. #7
    Member
    Join Date
    Feb 2008
    Location
    KC
    Posts
    41
    Quote Originally Posted by LuckyST View Post
    how do I know which one I have?
    If it's got A or AH at the end of the system serial number, then it's probably LE111H.
    Just a number with no letter(s) following, then probably LE111A.

    If the reflex port tube is straight, then probably LE111A.
    If it's bent at a right angle, then probably LE111H.

    To be certain look at the magnet housing on back of the woofer frame.
    If it's not labelled, show us a picture....

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. JBL cinema surround thread
    By JBL 4645 in forum General Audio Discussion
    Replies: 0
    Last Post: 09-14-2009, 03:32 AM
  2. JBL Control 1 summertime project surround array and more!
    By JBL 4645 in forum Lansing Product DIY Forum
    Replies: 95
    Last Post: 05-03-2009, 12:29 AM
  3. JBL tweeter 052TI a replacement for discontinued JBL tweeters ?
    By jan_slagman in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 06-12-2008, 07:12 AM
  4. JBL L110 Grills
    By Dave918 in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 10-04-2003, 08:41 AM
  5. Refinishing JBL L110 Cabinets
    By Dave918 in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 07-26-2003, 06:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •