Hopefully someone can help me???
how do i mount my 2390 to a baffle?
I'm not sure i have all the fasteners.
a picture would be great.
Thanks in advance
Hopefully someone can help me???
how do i mount my 2390 to a baffle?
I'm not sure i have all the fasteners.
a picture would be great.
Thanks in advance
http://homepage3.nifty.com/stonetechno/layout-3.html
2393 (on japan; found today occasionally). may be you find something useful..
Thanks, but i need the 2390 horn lens assy. drawing (folded plate) Like the one in the hartsfield.
i confused 2390 with 2392.
however, 2392 large format 3" horn and 2392=2311+2308
Is this what you are looking for?
http://www.audioheritage.org/vbullet...09+2310+baffle
This is what i have in my workshop. Sounds great. The 2310 lense is tapped for 10/32 screws. Sandwich the baffle between the horn and lense.
Also, somewhere there is a whitepaper from JBL describing the right size off baffle board. I think 20" square???
Scotty.
One step above: "Two Tin Cans and a String!"
Longtime Alaskan Low-Fi Guy - E=MC² ±3db
That's it. then (4) 10-32's is all that supports the horn, driver and lens?
Back when our company built custom cabs with this horn/lens we would remove the square metal blocks on the lens and retap the mounting holes to a larger size, 1/4-20. Pretty simple field mod.
This allowed a much wider choice of hardware, stronger mounting and the holes were already large enough on the horn so it made for a little better fit.
sub
I'd still support the driver, regardless...
Yes, still support the driver somehow!
One step above: "Two Tin Cans and a String!"
Longtime Alaskan Low-Fi Guy - E=MC² ±3db
There are currently 1 users browsing this thread. (0 members and 1 guests)