Results 1 to 4 of 4

Thread: JBL 2425H Distortion

  1. #1
    Junior Member
    Join Date
    Jan 2009
    Location
    Oklahoma
    Posts
    6

    JBL 2425H Distortion

    A friend of mine approached me with a problem he was having with a JBL
    2425H horn type driver that they use in their church. Problem is it distorts at moderate volume. I recommended / guessed it might be a bad diaphragm so he had me order an aftermarket replacement diaphragm. Same distortion remains after the replacement was installed.

    I've hooked the speaker up to different sources to eliminate a bad signal.


    What else might be causing this?

    Any help/suggestions will be appreciated.

    G

  2. #2
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,720
    First of all, I still wouldn't rule out the driver/diaphragm. It is possible that the new diaphragm isn't centered properly or perhaps the aftermarket diaphragm isn't any good.

    Secondly, when you say several sources... typically a source is referring to a signal source ahead of the line stage (mixer or preamp) and power amp. I assume you changed ALL up stream electronics including the amp.

    Is this a stereo set up? If so, I guess the other channel is issue free? If so, did you exchange channel one and two?


    More data is needed to really help.


    Widget

  3. #3
    Junior Member
    Join Date
    Jan 2009
    Location
    Oklahoma
    Posts
    6
    It is a stereo setup and my friend swapped speakers and the problem followed the speaker.

    Is there other replaceable parts in one of these drivers that may cause the distortion?

    Thanks.

  4. #4
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,720
    Quote Originally Posted by G-Rock View Post
    Is there other replaceable parts in one of these drivers that may cause the distortion?
    Nope.

    Can you pull the drivers and swap them? If the problem follows the driver you will need to send it to a professional reconer and have them diagnose a likely mechanical issue, if the problem remains with the speaker it is possible there is a crossover issue that is causing the speaker to overload at higher power.


    Widget

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Whatever Happened To JBL Video Products Group & JBL Projectors?
    By Genghiskahn in forum Lansing Product General Information
    Replies: 9
    Last Post: 02-19-2010, 12:00 PM
  2. Jbl S412p
    By ka7niq in forum Lansing Product General Information
    Replies: 48
    Last Post: 08-02-2009, 05:09 AM
  3. JBL 100 Distortion
    By c4kaboom in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 03-07-2008, 07:45 PM
  4. hi jbl
    By amadeo in forum Lansing Product General Information
    Replies: 21
    Last Post: 12-04-2007, 03:35 PM
  5. JBL 2404 2nd & 3rd harmonic distortion graph
    By kerrystansbury in forum Lansing Product General Information
    Replies: 4
    Last Post: 05-31-2006, 09:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •