Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: JBL SA-600 spareparts

  1. #1
    Senior Member
    Join Date
    Mar 2005
    Location
    Veenendaal, The Netherlands
    Posts
    209

    JBL SA-600 spareparts

    Hello JBL SA-600 owners,

    Since the restoration of my JBL SA-600 i get requests from all over the world for technical support.
    I have discussed this matter with my fellow-technician Mr.Ruud Janssen and he decided to make a list of a of the parts he replaced to restore the JBL SA-600 amplifier.
    The official JBL plan only mentions JBL factorynumbers.

    Anyone who wants to receive this list list can drop me a line.

    Kind regards,

    Jan Slagman
    Holland.

  2. #2
    Junior Member
    Join Date
    Jul 2011
    Location
    Williamsburg;, VA
    Posts
    1

    sa-600 parts list

    Thank you for offering to send your sa-600 parts list. I would like to receive one.

    The resotration you did was phenomenal - it must have sounded terrific after all yur work.

    Email to: Brio84@verizon.net

    Many thanks.

    Cheers - Bill
    Williamsburg, VA USA

  3. #3
    Heather [Senorita member] hjames's Avatar
    Join Date
    Nov 2005
    Location
    NoVA - DC 'burbs
    Posts
    8,362
    I just checked Jan's profile "Last Activity - 04-27-2011 11:16 AM"

    That means his last visit to the site was a couple months back -
    so he may not notice your direct post - if you want a quicker response,
    its best for you to send him a PM directly to get a copy of the schematic!

    Quote Originally Posted by webean View Post
    Thank you for offering to send your sa-600 parts list. I would like to receive one.

    The restoration you did was phenomenal - it must have sounded terrific after all yur work.

    Email to: Brio84@verizon.net

    Many thanks.

    Cheers - Bill
    Williamsburg, VA USA
    2ch: Oppo, Acurus RL-11, JBL 240ti, Heath AS101, Carver TFM-25,Von Schweikert VR4
    7: Oppo BDP103D, B&K, UREI 809A, JBL B460,

  4. #4
    Senior Member
    Join Date
    Mar 2005
    Location
    Veenendaal, The Netherlands
    Posts
    209
    Quote Originally Posted by webean View Post
    Thank you for offering to send your sa-600 parts list. I would like to receive one.

    The resotration you did was phenomenal - it must have sounded terrific after all yur work.

    Email to: Brio84@verizon.net

    Many thanks.

    Cheers - Bill
    Williamsburg, VA USA
    Bill mailed me and i have sent him the JBL SA-600 parts list

    Kind regards,

    Jan Slagman
    The Netherlands
    Last edited by jan_slagman; 07-17-2011 at 04:01 AM. Reason: improving text

  5. #5
    Senior Member
    Join Date
    Mar 2005
    Location
    Veenendaal, The Netherlands
    Posts
    209

    Jbl sa-600

    Hello,

    A fellow member named Isak Johannessen from Norway asked me for a JBL SA600 parts list by mail, but everytime i try to answer his mail i become this answer in the Norwegian language:
    Leveringen mislyktes til disse mottakerne eller distribusjonslistene:

    Can anyone tell me how to reach this Norwegian member ?

    With kind regards,

    Jan Slagman
    The Netherlands



  6. #6
    Senior Member Lee in Montreal's Avatar
    Join Date
    Sep 2010
    Location
    Montréal
    Posts
    2,496
    " Delivery failed to these recipients or distribution lists"

    Does he work at VintageAudio? If so, he is on Facebook or at post@vintageaudio.biz

  7. #7
    Senior Member
    Join Date
    Mar 2005
    Location
    Veenendaal, The Netherlands
    Posts
    209
    Quote Originally Posted by Lee in Montreal View Post
    " Delivery failed to these recipients or distribution lists"

    Does he work at VintageAudio? If so, he is on Facebook or at post@vintageaudio.biz
    Hello Lee,

    Thanks for your input. I'm not quiete sure if this is the man im looking for, but i'll give it a try and send him a mail.

    With kind regards,

    Jan Slagman
    The Netherlands.

  8. #8
    Junior Member
    Join Date
    Oct 2009
    Location
    Norway
    Posts
    20
    Started a new tread over at diyaudio:
    http://www.diyaudio.com/forums/solid...ml#post2843634

    Any comments/advice appreciated

  9. #9
    Junior Member
    Join Date
    Feb 2013
    Location
    Macedonia
    Posts
    4

    JBL SA-600 or rather 660 spareparts

    I thank you for offering to send the parts list.
    I like to receive it.

    Vriendelijk dank voor het aanbieden van de Onderdeel lijst van de SA-600.
    Ik zou deze graag ontvangen. (Ik heb een SA-660, maar wellicht zijn veel onderdelen identiek)

    Hartelijke groet,
    Best Regards,
    Arnoud Kramer
    from The Netherlands, living in Skopje
    -------
    Quote Originally Posted by jan_slagman View Post
    Bill mailed me and i have sent him the JBL SA-600 parts list

    Kind regards,

    Jan Slagman
    The Netherlands

  10. #10
    Senior Member Woofer's Avatar
    Join Date
    Jun 2005
    Location
    Australia
    Posts
    698
    Is there any chance this 'parts list' can be posted?

    I might be deaf, but I can still hear da bells! (Quasimodo)
    .... Oh, and the Kick Drum.

  11. #11
    Junior Member
    Join Date
    Feb 2013
    Location
    Macedonia
    Posts
    4

    JBL SA-600 or rather 660 spareparts

    I would like to receive the spare-parts-list.
    Sorry I forgot to mention my email-address,
    here it is: basy69@gmail.com
    Best Regards,
    Arnoud Kramer
    -------
    Quote Originally Posted by basy69 View Post
    I thank you for offering to send the parts list.
    I like to receive it.

    Vriendelijk dank voor het aanbieden van de Onderdeel lijst van de SA-600.
    Ik zou deze graag ontvangen. (Ik heb een SA-660, maar wellicht zijn veel onderdelen identiek)

    Hartelijke groet,
    Best Regards,
    Arnoud Kramer
    from The Netherlands, living in Skopje
    -------

  12. #12
    Senior Member
    Join Date
    Mar 2005
    Location
    Veenendaal, The Netherlands
    Posts
    209

    JBL SA600 replacing capacitors and transistors

    Quote Originally Posted by Woofer View Post
    Is there any chance this 'parts list' can be posted?

    Well, there you are
    Elco’s JBL SA-600


    a= axial (Vishay 2222 021)
    r=radial
    xxx/xx= microfarads/volts Note: stuks means pieces

    Poweramplifiers:

    numbers original replaced by

    C 1, 51 2 stuks a 2/25 a 2,2/63
    C 4, 54 2 stuks a 125/10 a 220/25
    C 5, 55 2 stuks a 80/25 a 100/25
    C 6, 56 2 stuks a 250/64 a 220/63
    C 8, 58 2 stuks a 160/64 a 220/63

    Powersupply:

    C 101, 102, 4 stuks r 4500/40 r 4700/40 (Vishay 2222 058)
    103, 104
    C 105, 106, 107,
    108, 109, 110 6 stuks a 1000/6 a 1000/16
    C 301 1 stuks (duo) r 2x1000/35 2 stuks r 1000/35 (Vishay 2222 037).

    Pre-amplifier:

    C 101, 201 2 stuks a 160/25 a 220/25
    C 102, 112, 117,
    202, 212, 217 6 stuks a 25/25 a 47/25
    C 103, 116, 123,
    203, 216, 223 6 stuks a 20/25a 22/25
    C 104, 204 2 stuks a 125/10 a 220/25
    C 105, 205 2 stuks a 35/3 a 47/25
    C 109, 114, 115,
    121, 124, 125,
    209, 214, 215,
    221, 224, 225 12 stuks a 10/25 a 10/63
    C 110, 210 2 stuks a 1/15 a 1/63

    Total:

    4 stuks r 4700/40
    2 stuks r 1000/35
    6 stuks a 1000/16
    4 stuks a 220/63
    6 stuks a 220/25
    2 stuks a 100/25
    8 stuks a 47/25
    6 stuks a 22/25
    12 stuks a 10/63
    2 stuks a 2,2/63
    2 stuks a 1/63


    The small signaltransistors of the JBL SA600:
    Alternatives for Q 101, Q 201; Q 103, Q 203, Q 104, Q 204, Q 105, Q 205, Q 107, Q 206 Q 108, Q 208 (NPN) f.i. BC109C, BC 184, 2N5827
    Alternatives for Q 102, Q 202, Q 106 and Q 206 (PNP) f.i. BC550, BC558C, 2N6003

    There are more transistors which can be used as long as you use low noise types and the Vce0 isn't lower than 30 Volts. Ofcourse the pinconfiguration has to be suitable or you have to make it suitable by twisting the connections

    Greetz, Jan Slagman
    Last edited by jan_slagman; 04-21-2013 at 11:01 AM. Reason: upgrading text

  13. #13
    Senior Member Woofer's Avatar
    Join Date
    Jun 2005
    Location
    Australia
    Posts
    698
    Thank you Jan most sincerely....

    Cheers lots,
    George.
    I might be deaf, but I can still hear da bells! (Quasimodo)
    .... Oh, and the Kick Drum.

  14. #14
    Junior Member
    Join Date
    Jun 2007
    Location
    Sri Lanka
    Posts
    7

    Red face JBL SA 600 Generic parts list

    Quote Originally Posted by jan_slagman View Post
    Hello JBL SA-600 owners,

    Since the restoration of my JBL SA-600 i get requests from all over the world for technical support.
    I have discussed this matter with my fellow-technician Mr.Ruud Janssen and he decided to make a list of a of the parts he replaced to restore the JBL SA-600 amplifier.
    The official JBL plan only mentions JBL factorynumbers.

    Anyone who wants to receive this list list can drop me a line.

    Kind regards,

    Jan Slagman
    Holland.
    Dear,

    Please send the parts list to me.

    Also the Volume control data ( Resistance to the Tapping from zero volume point).

    Kind Regards,
    Ananda.
    <ananda.eane@airport.lk>

  15. #15
    Senior Member Woofer's Avatar
    Join Date
    Jun 2005
    Location
    Australia
    Posts
    698
    Hello Jan,

    If you're still out there, I have just one question.

    The Pilot Lamp...... Did you replace yours or did you keep the original?
    The reason I ask, is because mine has just blown.
    Now, according to the schematics parts list, it should be a GE 1820 (28V), but the one pulled from mine is a GE 1835 (55V).
    Using an incandescent at half power is what I think gave it a distinct orange glow, which suited the amp, having orange behind the switches like it does.
    You'd think that these little lamps would be easy to come by down here in Australia, but they're not....
    Anyway, may have to get them online ex-US, so I'm hoping I'm getting the right one.

    George.
    I might be deaf, but I can still hear da bells! (Quasimodo)
    .... Oh, and the Kick Drum.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. The JBL 4345 Club
    By Ian Mackenzie in forum Lansing Product General Information
    Replies: 333
    Last Post: 06-29-2018, 01:40 PM
  2. Jbl S412p
    By ka7niq in forum Lansing Product General Information
    Replies: 48
    Last Post: 08-02-2009, 05:09 AM
  3. ...ever get an ice pick to the forehead?
    By robertbartsch in forum General Audio Discussion
    Replies: 53
    Last Post: 07-07-2009, 05:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •