Hi to all.
Just acquired a pair of these in need of a little TLC.
Pulled the woofers (123A-3)
The 123A-3 is a "negative polarity" transducer, yes?
GREEN wire was attached to the BLACK terminal at the woofer in both boxes?
This runs contrary to what I thought I understood to be the JBL unconventional convention based upon what I learned while doing my recently completed L55s (LE14A, also a "negative polarity" transducer, yet wired GREEN to RED as is usually the case; Thanks Zilch!) and other reading here.
Is this correct or someone's error from the past?
Not a lot going on with the network on this one.
Thanks!
Thomas