I need help to find a good matching woofer for Pt-f95Hf horn with 2452h-sl driver. The ideas are:
Fullrange 2-way with a help of a little sub in the future.
Small cabinet.
12" woofer.
mats
I need help to find a good matching woofer for Pt-f95Hf horn with 2452h-sl driver. The ideas are:
Fullrange 2-way with a help of a little sub in the future.
Small cabinet.
12" woofer.
mats
4345 diy, K2/Array diy Ht. TAD 4 way diy.
I can only regurgitate what I've heard here (no personal experience): 1200FE
I second Grumpy. No personal experience for me neither.
The 11" TAD might be a contender.
-Tim
2213 + 2435HPL w/aquaplas + H9800 (Matsj edition)
Both are not easy to get, i have a pair of TL 1102 in my other project.
I have read about:
128h-1
Le120h_1
Me120hs
2213-2214 ?
1200Fe
mats
4345 diy, K2/Array diy Ht. TAD 4 way diy.
1200c/1200w is another. It's used with a horn in the 4425 Mk II. A little hard to find also.
Perhaps finding a pair of 2204's, remove the pleated surround and replace with foam - and add a mass ring...
252G as used in the LSR 3 way ?
2214H would work well..
Just what is available over there in Lund?
skol
Nothing is available here. Maybe i can get a pair of 1200Fe, BUT they ainīt cheap.
mats
4345 diy, K2/Array diy Ht. TAD 4 way diy.
Le14h-3 is not available at the moment, 1200Fe is only 12 ohm available from K2s5800 not the 8 ohm.
Le14h-4 maybe ?
mats
4345 diy, K2/Array diy Ht. TAD 4 way diy.
Does someone have some ideas ?
Is there a big difference on Le14h-3 vs h-4 ?
What woofer can i use up to 1.2khz
mats
4345 diy, K2/Array diy Ht. TAD 4 way diy.
The 14H-4 is something like 2dB more sensitive than LE14H-3, but has some undampened resonances (less aquaplas) above 800Hz (see transducer info on these drivers) that could make it difficult to cross over at 1200Hz.
I just ordered a pair of 2020H to try with H9800 (matsj edition!) and PT-F95 horns.
These are very deep (ala 2214H) and should be a good match regarding time alignement.
Some sort of hi efficiency 4425, but they will need a sub (or even a woofer...)
I will let you know as soon as a can test them.
Here are some pictures of my 2020H that I just received ()
As you can see it is much deeper than a 2123H or a 128H.
I wish I still had a 2214H to compare, but I bet it is similar.
The 1200Fe also looks quite deep.
It makes for a good time alignement with the PT-F95HF.
Pos: Have you tried the FE 1200 ? Are they 8 or 12 ohm ? I bought 2 cabinets today and i have Le14h-3 at home so iīll try them and hear how good that sounds.
mats
Last edited by matsj; 11-19-2009 at 01:31 PM. Reason: spelling
4345 diy, K2/Array diy Ht. TAD 4 way diy.
I don't have 1200Fe's (sorry if my previous post was misleading), but 4313B did, with 435Be on PT-F95HF, and reported good results.
There are currently 1 users browsing this thread. (0 members and 1 guests)