Page 4 of 4 FirstFirst ... 234
Results 46 to 48 of 48

Thread: amp:s

  1. #46
    Super Moderator Hofmannhp's Avatar
    Join Date
    Dec 2003
    Location
    Central Germany
    Posts
    1,266

    Re: Re: your new amp

    [QUOTE]Originally posted by Figge
    [B]there is a fan in the back of the sinks also...it was REALLY noisy so i cut the cables the bearings were probably busted!

    QUOTE]

    Hi Figge,

    if you cut the fan....pay attention to the heat of the heatsinks.

    Without fan they work only fine when turned 90°, so that the rips are vertical.....it's in cause of the convection of the air round the heatsinks, in this case you should be sure, that the cold air can flow from bottom of the cabinet to the top.......or don't drive the amp to hard

    HP
    Please help us save more info about the vintage systems. Let us register your speakers and drivers.

  2. #47
    PSS AUDIO
    Guest

    Re: Re: your new amp

    Originally posted by Figge
    theres 3 cables 1. ground 2. +55V 3. -55V
    As those values are unloaded, I guess that you will not have more than 50V loaded, it means that this amplifier can deliver about 80W under 8 ohms!

  3. #48
    Figge
    Guest
    ok hooked it up and gave it a listen. itīs not good and not bad eather...pretty dark raw sound! howerver it had very nice bass! i have heard much worse amps! guess iīll fix it up a bit and sell it!

    btw: Yamaha p2200 any good?
    Last edited by Figge; 08-22-2004 at 11:06 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Bass testing your favourite amps
    By Ian Mackenzie in forum Professional Amps
    Replies: 65
    Last Post: 06-25-2004, 12:17 PM
  2. 4 Amps, which is the best?
    By Gary L in forum Lansing Product General Information
    Replies: 0
    Last Post: 06-16-2004, 07:00 PM
  3. Amp for bass driver
    By Ken Schwarz in forum Lansing Product General Information
    Replies: 20
    Last Post: 08-29-2003, 07:26 PM
  4. Crown Studio Reference amps
    By Tom Loizeaux in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 08-10-2003, 09:52 AM
  5. What amps to use with JBL XPL-200's in a bi-amped setup
    By pasadena in forum Lansing Product General Information
    Replies: 0
    Last Post: 07-13-2003, 05:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •