Results 1 to 4 of 4

Thread: 2235H Measured Speaker Performance - Anyone?

  1. #1
    Senior Member Loren42's Avatar
    Join Date
    Mar 2009
    Location
    Space Coast, Florida
    Posts
    235

    2235H Measured Speaker Performance - Anyone?

    Does anyone have the actual measured data set for a 2235H collected from something like a WT3 Woofer Tester?

    I am looking for something I can import into Bass Box Pro.

    I already have the T/S parameters, but I really wanted the complete data for the driver if someone has already captured it so I can correctly model this driver.

    Thanks in advance,

    Loren

  2. #2
    Senior Member
    Join Date
    Jul 2003
    Location
    Orange County, CA
    Posts
    3,604
    This is a WT2 test of an AlNiCo 2205 reconed as a 2235 by OCS. Note that the BL is a little low (should be >20). The woofers were subsequently remagnetized and the BL went up to 22-23.

    xV4Vas test completed: Fri Sep 28 10:01:36 2007
    Vas drive current 3181.82 uA
    ;------------------------------------------------------------------
    Revc = 6.1603 ohms
    Fs = 20.8398 Hz
    Zmax = 93.8486 ohms
    Qes = 0.4053
    Qms = 5.7688
    Qts = 0.3787
    Le = 1.2330 mH (at 1 kHz)
    Diam = 336.5500 mm ( 13.2500 in )
    ConeArea =88958.8296 mm^2(137.8865 in^2)
    Vas = 413.8976 L ( 14.6167 ft^3)
    BL = 17.6561 N/A
    Mms = 156.6237 g
    Cms = 372.3871 uM/N
    Kms = 2685.3774 N/M
    Rms = 3.5551 R mechanical
    Efficiency = 0.8911 %
    Sensitivity= 91.4990 dB @1W/1m
    Sensitivity= 92.6339 dB @2.83Vrms/1m
    ;------------------------------------------------------------------
    ; When testing drivers with an up/down radiation (cone motion)
    ; enough weight should be used to get a decent resonance change
    ; without significantly altering the drivers suspension zero point.
    ; A typically good configuration is when Fs/Fsa=1.25.
    ; Horizontally mounted drivers are less susceptable but require
    ; a clay or soft caulk mass. The following may be of help
    ;------------------------------------------------------------------
    Fs= 20.8398 Mms =156.6237 g
    Fsa= 16.6075 Mms+Ma=246.6237 g
    Fs/Fsa = 1.2548
    Ideal Test Mass = 88.1009 g
    Test Mass used = 90.0000 g
    Missed ideal by = 1.8992 g (too heavy)
    Nickels used = 18.0000
    Nickels desired = 17.6202


    xV4Arbitrary 1 Sweep test completed: Fri Sep 28 15:18:59 2007
    Arbitrary 1 Sweep drive current 3181.82 uA
    ;-------------------------------------------------------------
    ; Freq Impedance Phase Real Imag
    ; Hz Z=mag(R,I) Degrees Z*cos(P) Z*sin(P) L mH
    ;-------------------------------------------------------------
    10.0 17.2677 +48.0771 11.5370 12.8479 204.4809
    12.1 36.8349 +53.4484 21.9369 29.5903 389.4425
    14.6 56.1144 -47.5672 37.8618 -41.4163 -450.7543 ?
    17.7 17.7109 -61.3673 8.4869 -15.5450 -139.9051 ?
    21.4 10.3113 -52.4021 6.2911 -8.1698 -60.8033 ?
    25.9 7.8096 -36.8210 6.2517 -4.6805 -28.8058 ?
    31.3 6.7280 -15.0603 6.4969 -1.7482 -8.8972 ?
    37.8 7.5668 +9.1261 7.4711 1.2002 5.0510
    45.7 17.4092 +26.8906 15.5267 7.8740 27.4036
    55.3 14.8075 -60.0052 7.4026 -12.8243 -36.9081 ?
    66.9 7.3429 -46.4642 5.0579 -5.3232 -12.6688 ?
    80.9 6.1966 -31.2491 5.2976 -3.2145 -6.3264 ?
    97.8 5.7463 -20.3625 5.3872 -1.9995 -3.2540 ?
    118.3 5.6765 -11.8041 5.5565 -1.1612 -1.5628 ?
    143.0 5.8276 -4.5274 5.8095 -0.4600 -0.5120 ?
    172.9 6.2425 -1.8683 6.2392 -0.2035 -0.1873 ?
    209.1 6.1727 +2.3796 6.1673 0.2563 0.1950
    252.9 6.5329 +5.3918 6.5040 0.6139 0.3863
    305.8 6.8718 +6.9789 6.8209 0.8350 0.4345
    369.8 7.1784 +8.6901 7.0960 1.0846 0.4668
    447.2 7.6588 +10.5607 7.5291 1.4037 0.4995
    540.8 8.8042 +11.9789 8.6125 1.8273 0.5378
    654.0 10.7034 +4.7306 10.6669 0.8827 0.2148
    790.8 10.5066 -15.8034 10.1094 -2.8613 -0.5758 ?
    956.4 7.3591 -18.3664 6.9843 -2.3188 -0.3859 ?
    1156.5 7.0046 -6.1205 6.9647 -0.7468 -0.1028 ?
    1398.5 7.8542 -4.4500 7.8305 -0.6094 -0.0694 ?
    1691.2 8.2570 -9.6917 8.1392 -1.3900 -0.1308 ?
    2045.1 7.9691 -15.4454 7.6813 -2.1223 -0.1652 ?
    2473.1 7.3588 -19.1659 6.9509 -2.4159 -0.1555 ?
    2990.7 6.7182 -20.7647 6.2819 -2.3818 -0.1268 ?
    3616.6 6.1587 -20.7397 5.7596 -2.1809 -0.0960 ?
    4373.5 5.7138 -19.5324 5.3850 -1.9104 -0.0695 ?
    5288.7 5.3971 -17.6330 5.1435 -1.6349 -0.0492 ?
    6395.5 5.1955 -15.7599 5.0002 -1.4111 -0.0351 ?
    7734.0 5.0494 -14.4671 4.8893 -1.2615 -0.0260 ?
    9352.5 4.8954 -13.5754 4.7586 -1.1491 -0.0196 ?
    11309.8 4.7234 -12.5856 4.6099 -1.0292 -0.0145 ?
    13676.6 4.5593 -11.1909 4.4726 -0.8849 -0.0103 ?
    16538.8 4.4214 -9.4772 4.3610 -0.7280 -0.0070 ?
    20000.0 4.3144 -7.6578 4.2760 -0.5749 -0.0046 ?

  3. #3
    Senior Member Loren42's Avatar
    Join Date
    Mar 2009
    Location
    Space Coast, Florida
    Posts
    235
    Thank you!

  4. #4
    Senior Member 1audiohack's Avatar
    Join Date
    Jul 2007
    Location
    Las Vegas Nevada
    Posts
    3,095
    * Loudspeaker Enclosure Analysis Program
    * LEAP® EnclosureShop 5.2.0.363 May/14/2007
    * ©1993-2005 LinearX Systems Inc
    * Date: Oct 1, 2009 Thr 8:56 pm
    * LTD File=C:\Program Files\LEAP\Transducers\JBL.LTD
    * Electro Mechanical Parameters
    Name= JBL 2235H
    Note= min Z 7.1 ohm at 150Hz
    Model= LTD
    Domain= FreeAir
    Shape= Round
    Profile= Cone
    Fmd= 3.0000 KA
    Qmd= 1.0000
    Flp= 8.0000 KA
    Qlp= 2.0000
    Znom= 8.0000 Ohm
    Revc= 6.0000 Ohm
    Sd= 89.0000E-3 M²
    Mmd= 139.5840E-3 Kg
    Pmax= 170.0000 W
    Rtvc= 1.4710 °C/W
    Xgap= 7.1120E-3 M
    Xcoil= 19.1000E-3 M
    Xmax= 5.9940E-3 M
    Xfrg= 1.0000E-3 M
    Efrg= 1.0000
    BLo= 20.4282 T·M
    Ta= 25.0000 °C
    Vs= 2.8284 V
    Krm= 8.2600E-3 Ohm
    Frm= 1.0000E3 Hz
    Drm= 710.0000E-3
    Erm= 710.0000E-3
    Vrm= 0.0000
    Trm= 0.0000 Delta/°C
    Kxm= 12.3600E-3 H
    Fxm= 1.0000 Hz
    Dxm= 750.0000E-3
    Exm= 750.0000E-3
    Vxm= 0.0000
    Txm= 0.0000 Delta/°C
    Krs= 7.7873 N·S/M
    Xrs= 10.0000E-3 M
    Drs= 0.0000
    Ers= 0.0000
    Grs= 800.0000E-3
    Trs= 0.0000 Delta/°C
    Kcs= 408.9589E-6 M/N
    Xcs= 10.0000E-3 M
    Dcs= 0.0000
    Ecs= 0.0000
    Gcs= 800.0000E-3
    Tcs= 0.0000 Delta/°C
    Rms= 6.2298 N·S/M
    Mms= 154.7679E-3 Kg
    Cms= 327.1671E-6 M/N
    Vas= 370.1426E-3 M³
    Fo= 22.3728 Hz
    Qms= 3.4912
    Qes= 0.3156
    Qts= 0.2894
    BL= 20.3923 T·M
    Levc= 349.8151E-6 H
    SPLo= 93.0150 dB
    No= 1.2580 %
    * End


    That should be all you need and then some!
    Enjoy, Barry.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Thiele-Small Parameters definitions...
    By remusr in forum General Audio Discussion
    Replies: 9
    Last Post: 11-15-2011, 01:12 PM
  2. Perfect Speaker? Let's hear your vote!
    By Storm in forum General Audio Discussion
    Replies: 63
    Last Post: 12-06-2006, 06:19 AM
  3. L60T Speaker with 116H-1 Woofer Buzz
    By Servo in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 11-02-2006, 01:12 PM
  4. My rant about classic speaker "upgrades" (aka hack-ups, IMHO)...
    By GordonW in forum General Audio Discussion
    Replies: 12
    Last Post: 08-27-2003, 12:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •