What glue to use to replace dust cap?

[ngccglp]

Hi,

I have a scan speak woofer (the one that is coated with carbon fibre and inverted dust cap). Lately I noticed the dust cap is coming loose and I can hear buzzing. May I know if I can use the white glue used for wood to stick it back. I know this white glue will be transparent when dry.

Any advise?

Thanks

[mmiller43228]

I wouldn't use that type of glue. it gets too ridged. If I were you, I would use the softer glue that is used for foam surrounds.

[rdgrimes]

Orange Co Speaker has a black glue that stays soft and looks like factory original. It comes with all their replacement dust caps. It's a little tricky to use though, kind of sticky and stringy, so you want to practice with it on something else.

[ngccglp]

Thanks for the advice. Will investigate.

[4343]

Orange Co Speaker has a black glue that stays soft and looks like factory original. It comes with all their replacement dust caps. It's a little tricky to use though, kind of sticky and stringy, so you want to practice with it on something else.

It's called 3M 4789 SCOTCH-GRIP ADHESIVE. Available in large lots only, as far as I can tell, so buying a single tube from a speaker repair shop is probably your best bet...