Quote Originally Posted by pos View Post
Hi dkalsi

I am not sure the t-amp is the best candidate for this. Its noise floor is too high for such a high sensitivity driver.
I used to use one of the original sonic impact t-amps on 2407s and 2406s and the hiss was really annoying. Plus it emitted a pop when switched on...
If you plan to run the 2405 directly from the amp as GT suggest then you also have to check the DC offset of the amp. It can be quite high on some of these chip amp if they do not have protection caps on the output.
.
Ok - I will look into this. I was planning on using the Trend 10.1 - but I will for the DC offset issue.