Forum members,
this is my first real post on the forum, I find it a great source for information and inspiration.
My question relates to optimal use of LE15As/PR15s I have access to. For each enclosure I can either use one 8 ohm LE15A in combination with a PR15 or alternatively two 16 ohm LE15As (total load 8 ohm), and no PR15. I plan to use an active x-over, so impedance load on the x-over is probably not an issue. The rest of the setup will be one 2421B and one 2405 pr. enclosure, and a 3-way active crossover (crossing over @ approximately 800 Hz and 7-8 kHz).
What do you consider the advantages/disadvantages of the two LE15 setups? I'm trying to keep my enclosures at a reasonable size, so that will be an issue to consider. What would be a good enclosure size for two LE15As, they would probably require a ported enclosure? With the help of a friend and his equipment I'm able to tune the enclosures/ports.
I would appreciate any recommendations, advice or comments.
Thanks, and best wishes,
Sigurd
(S.O.Stefansson)