JBL 035ti1a & 095ti HELP!

[Darian]

Hello


I’m completely new to this site so any help would be great. I Have 2 x 035tia tweeters and 2 x 095ti mids and I have zero information on them. If anyone can help with t/s parameters or xover designs from anything that the drivers have been in that would be great! I have looked at the XPL200 series, but i have found no information to confrimthese where the drivers used.


Thanks for your time

Darian

[BMWCCA]

Check out the fifth post in this thread to explain the 095ti v. 093ti: http://www.audioheritage.org/vbullet...read.php?t=229

Can't say where the 035TiA was used with either, but it's quite common and commonly recommended as a replacement for many JBL tweeters.

Good luck.

[Darian]

Hi


Thank you very muchf for your reply. That confirms the drivers, now i just need to find a xover design from XPL200.

Any help is welcome!!!


Thanks

Darian

[Earl K]

Hi Darian,

Thank you very muchf for your reply. That confirms the drivers, now i just need to find a xover design from XPL200.

Any help is welcome!!!

- One needs to explore this site quite a bit to discover the following ( which is why I'll cut you a lot of slack for your "noob" question ) .

- Click on this "LINK" to go to the library for most of JBL Consumers tech sheets which happen to include crossover schematics .

- Once "there" you'll see the tech sheets for ( among other things ) all the other "XPL Series" speakers . ( I'd recommend that you ) download the entire series .

>< cheers

[Darian]

Hi Darian,



- One needs to explore this site quite a bit to discover the following ( which is why I'll cut you a lot of slack for your "noob" question ) .

- Click on this "LINK" to go to the library for most of JBL Consumers tech sheets which happen to include crossover schematics .

- Once "there" you'll see the tech sheets for ( among other things ) all the other "XPL Series" speakers . ( I'd recommend that you ) download the entire series .

>< cheers [/quote]

Hi cheers, i was there last night. I only found crossover schematics for the XPL A series that dont use the drivers i have. Cheers for your help and patiance never been closer right?

cheers

Darian