My 4343 came with the 2405's on the right side on both speakers. What is the ideal placement for them? As is or mirrored and if so should they be placed inward or outward. What arrangement gives the best imaging?
Thanks.
Fred.
My 4343 came with the 2405's on the right side on both speakers. What is the ideal placement for them? As is or mirrored and if so should they be placed inward or outward. What arrangement gives the best imaging?
Thanks.
Fred.
Pull them and mount them up on top the enclosure with a 2504.
OR
Mount them mirrored and either in or out depending on how far apart the two loudspeakers are placed.
They are placed a about 6 feet apart and I seat 10 feet from them.Mount them mirrored and either in or out depending on how far apart the two loudspeakers are placed.
Fred.
Hello Fred
Try and see what you like. Once they are mirrored you can play with either inside or out. Play with the toe in too. With the 2405 I would try to set the height close to ear level. They get very beamy in the vertical axis.
Rob
Rob,
I do have them toed in and sitting on my coach they are near perfect vertical aligment with my ears.
I will experiment over the week end as I will refoam them too if the faom shows up in the mail tomorrow.
Is removing the upper front baffle the best access to the 2405?
Fred.
Roll up a towel and put the speaker system on its back on the towel so you can pick it up again.
If you want to make it easy, remove the 2121.
Take out the screws, remembering the long ones are in the middle of the sides.
Tilt the baffle out by grabbing it in the 2121 cut-out.
Use a book to prop it.
Hold the 2405 against the baffle when loosening its screws so none gets bent
Or on the other hand it may be stuck to the baffle and wiggling will free it.
When reassembling, it should be possible to hand-tighten screws if things are lined-up properly
Remember that the wire with the black stripe goes on the black terminal on the 2405 and the 2121 and other JBL drivers too - black to black is the rule.
Last edited by John Nebel; 05-20-2004 at 09:05 PM.
John Nebel
Dammit, Nebel! Nobody ever told me there was a rule!!Originally posted by John Nebel
Remember that the wire with the black stripe goes on the black terminal on the 2405 and the 2121 and other JBL drivers too - black to black is the rule.
bo
"Indeed, not!!"
Thank you John for the excellent explanation.
Fred.
Saturday while refoaming the 2121 and 2231I unmounted the front baffle folowing John's advices.
I mounted the 2405 outward and like it that way.
No big difference but a little more open stage.
Fred.
Originally posted by Infredible
...a little more open stage.
Now, pay your dues!! The only kind we (or many of us... ) thrive-on here - some pics of your gear!
bo
"Indeed, not!!"
Now that I'm done with it I will take some snapshots.Now, pay your dues!! The only kind we (or many of us... ) thrive-on here - some pics of your gear!
Fred.
Per Bo's request and for the general public here I've done my home work right coming back from work.Now, pay your dues!! The only kind we (or many of us... ) thrive-on here - some pics of your gear!
Here's a few shot of my gear.
Overview of my listening space...
The ladys... notice how mint they are.
There are currently 1 users browsing this thread. (0 members and 1 guests)