Hey Earl I haven't seen you on the board for awhile.Here are those measurements you asked me about.The 288C is actually a 288-8E Regards John
Hey Earl I haven't seen you on the board for awhile.Here are those measurements you asked me about.The 288C is actually a 288-8E Regards John
"James B. Lansing" = Lansing Manufacturing ~ Altec Lansing ~ JBL
Thanks for the posting these measurements John !
The flattness of the T350(s)' response is quite a pleasant surprise .
<> cheers
Sorry Earl I didn't know how to get in touch w/you !! And wanted to get them to you ASAP as you have been so gracious to me. Thanks again for all your help.(Pano) will be back tomorrow.He asked me to take some off axis measurements of the T350's while he is gone.Then we will get started on the X-over.So I got to go get some Baltic B.My lumber yard has to order it but can have it in a day.
BTW. Welcome Back Earl it's nice to see you You'll have to explain a bit of what your looking for on the measurements as Pano and I spent all Sunday on this.It went quite smooth though Thanks Again Earl I sent PM to yggrdrasil to change Title.
"James B. Lansing" = Lansing Manufacturing ~ Altec Lansing ~ JBL
Hey Earl, I couldn't post it there, but can post it here.File size was too large. Regards ~ John
PS. Thanks for your kind support on my project.
"James B. Lansing" = Lansing Manufacturing ~ Altec Lansing ~ JBL
There are currently 1 users browsing this thread. (0 members and 1 guests)