Hi fans
Wanted screws for recondition Altec 290 8 L
- 6 screws no magnetic for menbran fixing
- 2 screws for intern aluminium cache fixing
- 1 external gum protection
- 2 troats 30162
Many thanks
Hi fans
Wanted screws for recondition Altec 290 8 L
- 6 screws no magnetic for menbran fixing
- 2 screws for intern aluminium cache fixing
- 1 external gum protection
- 2 troats 30162
Many thanks
You can take an old screw, bolt or stud to Home Depo or Lowes and match them up with new hardware.
My Depo store has a thread reference tool that is located in the hardware department. Bring in an old bolt and test a few threads and locate the one you need. The tool is marked to show the thread type and thread diameter.
I had a few old Altec 802s recently that had busted studs, cross-threaded threads and buggered bolts. My small set of threaded taps and dies was very useful for fixing these issues. You can buy a set of inexpensive taps and dies at www.HarborFreight.com.
Your best bet is to contact Great Plains Audio. They will most likely have all of the parts you need. I assume they will ship internationally.
http://www.greatplainsaudio.com/about.html
Widget
Isn’t there a tool that can make a threading on screws?
Although I have a tap and die set I rarely find myself manufacturing my own screws, even at the overpriced hardware store down the street it just seems a bargain to buy what I need.
Probably easiest to source it all from GPA, maybe get some gaskets as well to round out the order.
Harry
You could try a Jeep, Dodge, or Harley repair shop.
Hi
Manny thanks for our reply, I'll watch your advice.
Who has needless pieces- 1 external gum protection
- 2 troats 30162
Best Regards from France
There are currently 1 users browsing this thread. (0 members and 1 guests)