Starting this thread so we can post just about anthing and the thread starter won't worry about off topic stuff!
TO answer your question Phil:
The 250 TI are functional. have not mounted the XO externally to get rid of some vibrations by the TIBQ XO mounted in the TI location. I have started acquiring parts. If you run a bass test disc there is some vibrations, not as much as in the house but there. The 2nd set of TI are waiting for the reconed woofers, at least 1/2 way done but I don't hurry his work and aside from this there wouldn't be any real hurry. 1 of the 2nd set of 250 is pulling duty as center channel but needs that woofer refoamed and that would become a spare woofer when the other 2 come back
Duanage and I are working on some barter/cash deal to get my spare 120TI 128h woofers refoamed along with a spare 2245 (for the b460) and some Dahlquist woofers refoamed. I am no longer the owner of any proIII speakers , subwoofers or parts
Some l20t on adcom 400 pre amp and gfa 555 with a low end Velo sub in another room which will get the spare 120Tis when they finished w/refoam complete , not as good a set up as I thought it would be with the l20t.
On the DQ 10 set up upstairs I have replaced the woofers, a vast improvement , need to track down some virations there too but that set up sounds pretty good with the DBX's b460 clone and matching amp
Basement has some l20t3 in the ping pong room, sounds like I would expect, hard surfaces, poorly placed but almost as good sound as the l20t set upstairs
Bedroom is a 2 channel JVC receiver dq-28 speakers sound fine,nothing exceptional but fine, mainly tv watching
Wiring still could use attention , especially in main setup, and the the SMS-1 connected but not calibrated, could be done before guests arrive
Thats most of it, the 3 Perreauxs are left in the basement, the 2 6000 passive biamp the main 250s and the 3000is bridged on the center. a 2nd adcom 555 is bridged on the b460 and the built in amps in the sony receiver for the 4 surround 120tis
Mark