Results 1 to 2 of 2

Thread: Query on 604-8K Network

  1. #1
    Senior Member
    Join Date
    Feb 2004
    Location
    Land of Sunshine
    Posts
    423

    Query on 604-8K Network

    Hi,

    The 604-8K network has two positions, one to use it as a HF attenuator, the other as a 2-band EQ.

    May I know at the HF Attenuator mode, is the horn equalization circuit for the mantaray horn switched on? Or do I have to switch to the 2-band EQ mode in order to switch on the horn equalization circuit?

    Just scored these, they are in very good condition. I had VOTT A7/A5 before, but these duplex somehow images extremely well. I guess that's why they used it in so many studios.

    Thanks
    Attached Images Attached Images   

  2. #2
    Senior Member
    Join Date
    Feb 2004
    Location
    Land of Sunshine
    Posts
    423
    Just to give an update on the 604K/620. I was using it free standing and was not satisfied with the overall balance, while it images and does vocals well, it tends to sound lean with not enough bass volume and extension. I couldn't understand how ALTEC could spec it as 30Hz to 20KHz.

    Then I decided to place them against a wall after seeing how they are mounted in studios. Jackpot!! The sound is full and solid, and good bass articulation and punch. And the Optimum setting on the mid and high Lpads are spot on too with this placement, there is no need for further adjustment.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 4343 VS 4345 network?
    By tv506 in forum Lansing Product Technical Help
    Replies: 21
    Last Post: 08-17-2011, 08:12 AM
  2. Capacitors...
    By lpd in forum Lansing Product Technical Help
    Replies: 145
    Last Post: 06-14-2007, 07:16 AM
  3. Query on JBL Crossover Network
    By ngccglp in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 12-12-2006, 09:27 AM
  4. Question about Dynavox Imperial 604 Duplex
    By Micha35 in forum Lansing Product DIY Forum
    Replies: 4
    Last Post: 02-14-2006, 10:09 AM
  5. Help needed from you network wizards
    By Guido in forum Lansing Product Technical Help
    Replies: 14
    Last Post: 04-07-2004, 11:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •