One of my 2420 horns keeps cutting out, and when I crank the L-pad it cracks back open and will work fine for awhile and then cut out again. I'm certain it is the horn and not the crossover/l-pad as I swapped drivers and the problem moved from cab to cab. I have a pair of 2410's and LE-175's. Can I swap these into a 4333 or should I repair the driver.
I was considering taking a diaphram from teh 2410 and putting it in the 2420 is this possible?
Thanks
P.s I tried to take the driver apart the last time I pulled them from the cab, and removed the bolts from the horn but could not seperate the two. Are they bound together by an adhesive or a thread, or do I just need to use brute force?