Results 1 to 4 of 4

Thread: Blown woofer ?

  1. #1
    Senior Member RIGGED's Avatar
    Join Date
    Sep 2007
    Location
    Houston, Texas
    Posts
    176

    Blown woofer ?

    How can you tell when a woofer is blown?
    A while back I cranked up my LX55 speaks and one started to make a rattlin noise. Upon closer inspection, the foam came loose from the paper.
    I have owned Cerwin Vegas (notorious foam rotters) in the past and foam or not, they did not make this rattlin noise.


    Thoughts?


    RIGGED

  2. #2
    Senior Member
    Join Date
    Feb 2007
    Location
    Christchurch, NZ
    Posts
    1,400
    Once the foam has gone the cone can flop back and forth in the gap. The noise you are hearing is probably the voice coil hitting the sides of the gap. If the speaker still operates at low volume it should still be ok. If so, stop using them and get them refoamed!

    Allan.

  3. #3
    Senior Member
    Join Date
    Jul 2006
    Location
    Kansas City
    Posts
    103
    The term "blown speaker" gets thrown around very loosely. I allways say if it still has sound comeing from the coil its not blown. Blown in my opinion means the coil has opened and the speaker is completely dead. But just because a speaker is still playing doesnt mean its not damaged and needs a recone. There are many ways to damage a driver...DC burn from cliping..over excursion..ect..

    Sounds like you just need a refoam job. But a local repair shop could know for sure. If you continue to play a speaker with no foam surround you will damage the coil. There is no suspension for the cone and the coil just flops around and bangs into the motor assembley. And can pop out of the gap very easily.

  4. #4
    Senior Member RIGGED's Avatar
    Join Date
    Sep 2007
    Location
    Houston, Texas
    Posts
    176
    Thanks fellas, I'll go the refoam route first.



    RIGGED

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. L 65a woofer?
    By toddrr in forum Lansing Product Technical Help
    Replies: 34
    Last Post: 03-26-2010, 10:47 AM
  2. Pictures from Northridge and LA
    By Don McRitchie in forum Lansing Product General Information
    Replies: 60
    Last Post: 09-29-2007, 09:33 AM
  3. JBL 12" Woofer
    By speakerdave in forum Lansing Product General Information
    Replies: 18
    Last Post: 01-18-2007, 02:58 AM
  4. Woofer Frequency Testing Take 2
    By toddalin in forum Lansing Product DIY Forum
    Replies: 0
    Last Post: 12-26-2005, 03:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •