3110 Crossover Problem !!!??? Need Help!

[tcorp]

Hello,
I have a loose speaker wire (positive) post on my 3110 crossover. I am able to spin it in the box of the crossover. This causes static and occasionally the speaker cuts out all together. If I play with it for a bit it works fine. However, I know this can't be good, so before I go digging into this, anyone had these apart before? Any tips? I have a feeling it is a simple fix, but thought I would ask some advice first. Any advice would be appreciated.
Thanks in advance!

[John G]

Should be an easy fix. Remove the crossover from the speaker enclosure, drill out the rivets to open up crossover, tighten post, re-assemble.