Hey guys, I've been reading previous posts on updating L110 xovers but have an atypical setup and was wondering if any changes should be considered during update. DIY speaker is as follows.
36 x 18 x 13 cabs.
Volume= 1.7 cf after insulation.
LE14A lows.
104H-2 mids.
2412H highs w/ 8 x 4 plastic horns(Parts Express).
4 1/4 x 7 ports.
If no other changes am I to understand that .01 bypass caps are preferred over .068's?
Also, is removing the L-pads preferred? If so, replace with what?
Thanks for your time.