Results 1 to 10 of 10

Thread: Speaking of neato little tube amps...

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member GordonW's Avatar
    Join Date
    May 2003
    Location
    Marietta/Moultrie GA USA
    Posts
    1,455

    Speaking of neato little tube amps...

    Found an old Magnavox console, that had one of the AMP185, 6V6 PP tube amps in it, circa 1960. It should be about 15w/ch...

    There was very little wrong with it- in fact, the cathode resistors on all the 12AX7 input tubes, was the ONLY functional problem, preventing operation. Replaced those, along with the ceramic caps in the input stage, and WOW. I like it.

    It's a little "extra full" in the absolute lowest bass registers (I would imagine it kinda just "ramps up" a bit, starting at about 45 Hz going downward toward 20 Hz, where it's probably 2 dB louder at 20 Hz than 45 Hz), but BOY... does it EVER sound NATURAL on midbass transients. There's a tactile nature to pianos, plucked strings, even clarinets and flutes, that just sounds LIKE THE REAL THING. I'm amazed... this was NOT an exotic amp, in the first place... it just happened to be very elegantly and well designed, apparently.

    After getting it "souped up" and working, I "prettied it up" as well. Poplar wood planks on the sides and front of the metal chassis, with some planks on top to accomodate a power switch and output binding posts, with the wood stained cherry color. It's kinda cool looking now!
    Attached Images Attached Images  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Capacitors in old tube amps?
    By Regis in forum Professional Amps
    Replies: 10
    Last Post: 07-16-2012, 09:05 AM
  2. Bass testing your favourite amps
    By Ian Mackenzie in forum Professional Amps
    Replies: 65
    Last Post: 06-25-2004, 12:17 PM
  3. Cary Audio Tube amps
    By John in forum Professional Amps
    Replies: 11
    Last Post: 02-08-2004, 06:27 PM
  4. Amp for bass driver
    By Ken Schwarz in forum Lansing Product General Information
    Replies: 20
    Last Post: 08-29-2003, 07:26 PM
  5. What amps to use with JBL XPL-200's in a bi-amped setup
    By pasadena in forum Lansing Product General Information
    Replies: 0
    Last Post: 07-13-2003, 05:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •