I have a pair of 4312's and one seems to not be as bright as the other one. My question is "how do I get the crossover network out or get access to it?"
Thanks,
Jim
I have a pair of 4312's and one seems to not be as bright as the other one. My question is "how do I get the crossover network out or get access to it?"
Thanks,
Jim
I just looked at a 4312a at the station and there are no pots. To access the X-over you have to remove the woofer, be care full when doing so.
However I doubt that there is x-over problem. there is a chance that you could have blown HF driver( I hope not). If you have an Ohm meter you could measure the drivers to see if they are bad.
Get a test CD and do some frequency test on both speakers. John
There are currently 1 users browsing this thread. (0 members and 1 guests)