Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: 4315 Speaker Stands

  1. #1
    Regis
    Guest

    4315 Speaker Stands

    The oak 4315 Speaker stands are done. I wanted the exact tilt-back of the L-300's and the ability to move them as well. The casters are sunken in, from the bottom, so that the edge of the stands is only a 1/2 inch or so off the ground and the casters are hidden.

    I am pleased with how they look. The Velodynes work very well, though I find it better to leave the grills on, as that much woofer motion just about freaks me out! The 4315's can run naked.
    Attached Images Attached Images    

  2. #2
    Senior Member macaroonie's Avatar
    Join Date
    Jan 2005
    Location
    near Glasgow Scotland
    Posts
    2,204

    Nice

    Does it help the image ?

  3. #3
    Regis
    Guest

    Talking

    Quote Originally Posted by macaroonie View Post
    Does it help the image ?
    Thanks and yes, they sure sound better, but I'm not sure if it's psychological. They sure look better than just being 'boxes' on the floor.

  4. #4
    Senior Member WDJ's Avatar
    Join Date
    Nov 2005
    Location
    Sulphur Springs, TX
    Posts
    132

    Dimensions?

    Very nice!

    Would you mind supplying the dimensions?

    (Labels are a nice touch too!)
    Share what you know, learn what you don't...

  5. #5
    Senior Member
    Join Date
    Aug 2003
    Location
    La Habra, California USA
    Posts
    1,553
    Hi Regis,

    Looks great! Would you mind sharing dimensional information and how you recessed the casters?

    Any idea how much it would take to duplicate them (hint, hint!)?

    Bart
    When faced with another JBL find, Good mech986 says , JBL Fan mech986 says

  6. #6
    Regis
    Guest
    Bart, I had a good bud build them and it took him awhile. I can provide dimensions and I'll take add'l photo's of the undersides (that will cover WDJ's request as well). R.J. Timmerman out there in Nebraska provided the custom reproduction labels for the stands and he did a nice job. He shipped them in bulletproof packaging that would've survived a Metro Rail accident.

    I spent over $100 on materials. Solid Oak is soooo frigging expensive these days! Plus, I went with all brass fittings and screws (I hate the look of cheap stamped steel...). I'd estimate about $150 total for both stands.
    Last edited by Regis; 10-08-2008 at 03:33 PM. Reason: cost data not included in first post

  7. #7
    Regis
    Guest
    Picture of bottom side detail

    (PS, if you can run bigger wheels do it. My friend had a tough time with the bigger wheels and they would've rolled easier, but they work good enough, as they're not moved that often)
    Attached Images Attached Images  

  8. #8
    Senior Member pmakres1's Avatar
    Join Date
    Mar 2005
    Location
    Florida
    Posts
    557

    Beautiful

    Very nice! The labels are a nice touch. Did you remove the labels from the speakers themselves?

    Pete

  9. #9
    Regis
    Guest
    Bart and WDJ, I'm gonna get the measurements tonight and post them. Pete, the labels were custom-made by our good friend R.J. Timmerman. It's nice to see the silver-orange-and-black of the JBL Professional logo, without having to remove the grills.

  10. #10
    Regis
    Guest

    4315 Speaker Stands dimensions

    The stands are constructed from 3/4' thick oak and were lovingly stained and veneered by my significant other, Deb.

    Here are the dimensions:

    Width -18"
    Depth -14"
    Front Height - 5 1/4"
    Rear Height - 3 3/4"
    Back Board - Height - 7"

  11. #11
    Senior Member WDJ's Avatar
    Join Date
    Nov 2005
    Location
    Sulphur Springs, TX
    Posts
    132

    Stand Dimensions

    Thanks!

    Now if I just could have won the B380/BX63A that was on ebay; it ended up at over 1300.....There's another one starting at 1250 on there now.

    I'm trying to buy a 2245H now and have plans for a B460....

    Wayne
    Share what you know, learn what you don't...

  12. #12
    Senior Member pmakres1's Avatar
    Join Date
    Mar 2005
    Location
    Florida
    Posts
    557

    Nice

    Quote Originally Posted by WDJ View Post
    Thanks!

    Now if I just could have won the B380/BX63A that was on ebay; it ended up at over 1300.....There's another one starting at 1250 on there now.

    I'm trying to buy a 2245H now and have plans for a B460....

    Wayne
    This one looks even nicer than the last one....that is if the pics are authentic. The grille(s) appear two different colors. It still looks nice though....


    Pete

  13. #13
    Heather [Senorita member] hjames's Avatar
    Join Date
    Nov 2005
    Location
    NoVA - DC 'burbs
    Posts
    8,388
    Ebay - http://cgi.ebay.com/ws/eBayISAPI.dll...m=250307006586
    Quote Originally Posted by pmakres1 View Post
    This one looks even nicer than the last one....that is if the pics are authentic.
    The grille(s) appear two different colors. It still looks nice though....


    Pete
    I have a B-380 - the grill is two piece and its supposed to be two-tone like that (kinda cool, don't ya think?).
    The previous ebay one was not correct in that aspect.

    Hard to tell in the Black-n-white
    http://www.lansingheritage.org/image...b460/page2.jpg

    - So here's a shot of mine from Feb 07 before and after I replaced the grill cloth on it. (I kept it two tone but moved the brown to the small grill), and did the large in zilch-cloth - Monitor Blue)
    Attached Images Attached Images   
    2ch: Oppo, Acurus RL-11, JBL 240ti, Heath AS101, Carver TFM-25,Von Schweikert VR4
    7: Oppo BDP103D, B&K, UREI 809A, JBL B460,

  14. #14
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    14,548
    Quote Originally Posted by WDJ View Post
    Now if I just could have won the B380/BX63A that was on ebay; it ended up at over 1300.....There's another one starting at 1250 on there now.
    You could build yourself two for that kind of money.

    The BX63A can be built by anyone who likes soldering stuff together. The most expensive part would probably be a nice little chassis.
    Quote Originally Posted by WDJ View Post
    I'm trying to buy a 2245H now and have plans for a B460....
    Cool!




    Nice stands Regis!

  15. #15
    Unabashed Speakerholic cosmos's Avatar
    Join Date
    May 2007
    Location
    Ohio
    Posts
    297
    Very nice stands! The 4315s look great on there. Looking forward to the dimensions and angles. I might make a pair for mine.

    I really don't notice missing much bottom end with my 4315s. Perhaps, it is the room or the gear?

    Regarding building the B460, I own a couple 2245h and was looking for some good box plans for them. the B460 clone might be the ticket..

    Thanks for sharing.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 4343b Speaker Stands - S91
    By John W in forum Lansing Product DIY Forum
    Replies: 8
    Last Post: 04-05-2008, 01:20 PM
  2. Duplicating speaker stands
    By JBLRaiser in forum Lansing Product General Information
    Replies: 3
    Last Post: 02-19-2006, 11:00 AM
  3. Speaker stands for 4313Bs, 4311,s and 4312s.
    By Audiobeer in forum Lansing Product General Information
    Replies: 7
    Last Post: 06-11-2005, 02:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •