Hi:
I´ve searched this forum, JBL and my old literature, but cannot find anything on the LX3 xover; Can You help, I´d like to know what systems it came with, components and xover freq.
Thanks.
Hi:
I´ve searched this forum, JBL and my old literature, but cannot find anything on the LX3 xover; Can You help, I´d like to know what systems it came with, components and xover freq.
Thanks.
Hello All
The LE-10 was a 16 ohm speaker.The LE 10A was an 8 ohm unit.Thus the differences in the crossovers.The LX 3 was used in the early Minigons that were 16 ohm units.The later Minigons used the LE 10A driver and the LX 3-1 crossover.These were decreed as an 8 ohm configuration.Took me a few sets of Minigon ownership to figure this out.
Best regards,Oldmics
P.S.Forgot to mention that the crossover frequency for the LX 3 is 1000 HZ at 12db per octave slope.Don"t know if it is the same for the LX 3-1 crossover.If its really important,I can measure an LX 3-1 crossover that I have laying around.Lemmie know.
Last edited by Oldmics; 04-16-2004 at 10:03 PM.
Try looking up the 1967 listing of components. The number on the back is, "January 1967". It should be listed there.
Ron
There are currently 1 users browsing this thread. (0 members and 1 guests)