Project

[alpina]

hello again.
I want to do a draft 2-way and a woofer 18 ".I've seen a few photos and now I have one that I liked but I would like to please me plant more examples to decide better.
I thought something like my JBL 4430 or TAD but woofer 18".any better idea?

[yggdrasil]

I don't think you will be satisfied with the crossover region in a 2-way using an 18" and a compression driver. Both drivers will be far out of their "comfort zone".

Have you looked into these threads for ideas?
http://audioheritage.org/vbulletin/s...ad.php?t=21738
http://audioheritage.org/vbulletin/s...ghlight=1200fe
http://audioheritage.org/vbulletin/s...ad.php?t=21947

[alpina]

thanks.
More appropriate is to choose a woofer 15 "?

[Robh3606]

More appropriate is to choose a woofer 15 "?

Depends for a 2 way yes I would agree but there are plenty of drivers out there besides a 15" that can work. You own 4430's that's going to be hard to beat using another 15" driver. You might want to look at a more modern horn than the 2344 or a newer compression driver. There are other 15"s besides the 2235 but they are damn hard to get.

What about the 4430's are you trying to improve???

Rob

[alpina]

It does not matter ... I want to do something similar for my other room

[Robh3606]

It does not matter ... I want to do something similar for my other room

In that case just clone another pair.

Rob

[Zilch]

In that case just clone another pair.

With "New Technology" upgrades....

[alpina]

So I had thought ... but wanted something bigger

[pos]

build a 4435 then

[alpina]

There is little here in Spain

[pos]

you can build a clone
The HF is the same as the 4430 and the lows are a pair of 2234H woofers in each speaker (2235H without mass ring, ask your reconer, he can even remove it from a working 2235H).
The networks are described on these forums.

[pos]

and there is a pair for sale in france for 3800€

[alpina]

jbl 4430 in 3800 euros?...very money.
I have seen in a forum, this box and I liked to do it myself...no centuri...

[pos]

I was talinkg about a pair of 4435

If you have the components and wood working skills (or knows a cabinet maker) they are quite easy to clone.

Anyway unless you are prepared for many trials and errors with good test gears you are better off cloning an existing design (this is a classic advice on this board, but so true)

[alpina]

4435...well,well.
I have carpenter friend makes me a copy of my 4430 at EUR 100 each ...but I want something different for my Salom and the 4435 are too wide to put them .had also thought of a copy of 4430 but with 18 " .