I need your Help with refoaming

[leberwurst]

Hello

I am new in your forum and need some help with refoaming my speakers.
This are 16" speaker like the TAD,s but I cant finde new foams for this
speakers.

Regards

From Germany

[boputnam]

You too, need to contact Rick Cobb and see if he can help.

[speakerex]

Measure the OD (outside diameter) and ID of the original foam. Even if it has disintegrated you can see where it once was. Let me know those sizes and I will give you replacement foam options. You can post again or email me directly → cathy.

[leberwurst]

Hello

Here are the dates


C=390mm
B=370mm
A=330mm
E=320mm
D=20mm

Regards

Piet

[leberwurst]

Hello

I think a foam for the TAD1602 will work but they sell only recone kits



Piet

[speakerex]

there really is no good foam option available. You can try to very gently stretch a foam with a 366.70 OD and 306.375 ID or you can try to cut and seam a larger one with a 430.20 OD and 374.65 ID. Neither one is a perfect alternative. sorry I couldn't help more.