These are the specs of the new Crown 802D amps:
Specifications
Sensitivity (volts RMS) for full rated power at
4 ohms1.25
Frequency Response (at 1 watt, 22 Hz - 20 kHz)+0 dB, –1 dB
Signal to Noise Ratio below rated power (20 Hz to
20 kHz, inputs terminated)
A-weighted, below rated power
No weighting, below rated power> 100 dB
> 95 dB
Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz< 0.5%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB< 0.3%
Damping Factor (8 ohm): 10 Hz to 400 Hz> 200
Crosstalk (below rated power)
at 1 kHz
at 20 kHz–75 dB
–50 dB
Input Impedance (nominal) (balanced,
unbalanced)20 kilohms, 10 kilohms
Load impedance
Stereo
Bridge mono4-8 ohms
8 ohms
AC Line Voltage and Frequency Configurations Available (± 10%)120 VAC 60 Hz
VentilationFlow-through ventilation from front to back
CoolingInternal heat sinks with forced-air cooling
Air Volume Requirements (per minute
per unit)80.15 ft3 (2.27 m3)
Dimensions: Width, Height, DepthXLS 802: EIA Standard 19"W (EIA RS-310-B) x 3.5” (8.9 cm) H x15.2" (38.6cm) D.
Net Weight, Shipping Weight
XLS 802: 35.5 lb (16.1 kg), 40.5 lb (18.4 kg)