Page 1 of 2 12 LastLast
Results 1 to 15 of 23

Thread: diference between LSR32 and LSR6332

Hybrid View

  1. #1
    Senior Member Valentin's Avatar
    Join Date
    Apr 2003
    Location
    Mexico
    Posts
    719

    Question diference between LSR32 and LSR6332

    What is the difference in performance between LSR32 and LSR6332?

    Is their a different sound character between the tweeter 053ti and the 053tis and how does the crossover changes in the bass section and high section influence the whole system.

    The specs don’t change but certainly if there is a change in these components it is for a better sound.

    Hope too here form you soon

    Valentin

  2. #2
    Dang. Amateur speakerdave's Avatar
    Join Date
    May 2003
    Location
    Northern California
    Posts
    3,310
    As one of the resident LSR listeners I should jump in here, but to tell the truth I don't know.

    I haven't paid much attention to the description of the new speaker. I have read that they are shielded. The 053 has a ceramic magnet, so they've probably glued an opposing magnet on that. Does that affect the sound? Probably, in some slight way. Negatively? I don't know.

    I'm not familiar with the change in the crossover at all, so I can't comment on that, and I certainly haven't heard the new speaker.

    Maybe it's about time for me to look into it. Do the differences add up to the $1700 additional cost of the new pair vs the average price of a pair of used LSR32s? Not for me, I'm guessin', which is why I haven't paid much attention.

    New is nice. If you can afford that, go for it. Either way I think you'll find the LSR series a very rewarding way to listen to recorded music in small to medium sized spaces.

    What are you listening to now?

    David

  3. #3
    Senior Member Valentin's Avatar
    Join Date
    Apr 2003
    Location
    Mexico
    Posts
    719
    I am actually hearing a pair of JBL SVA2100 but i have a opportunity to buy some LSR at distributor price.

    my room is small to mid 16d x12.5w x 9h but it opens up to a room the same size through a double door.
    I plan to buy a pair of LSR6332 and 1 or 2 subwoofers of the LSR6312p that have RMC (Bass Eq.) and put them as towers.

    Are you using your system with a sub . What speaker did you have before the LSR and how is the difference between them.

  4. #4
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    14,875

    Re: difference between LSR32 and LSR6332

    "What is the difference in performance between LSR32 and LSR6332?"

    None. The baffle was redesigned and a new part number was assigned. It was a manufacturing decision and nothing more.

  5. #5
    Senior Member JuniorJBL's Avatar
    Join Date
    Feb 2004
    Location
    Denver
    Posts
    1,635

    Talking Re: Re: difference between LSR32 and LSR6332

    Originally posted by Giskard
    "What is the difference in performance between LSR32 and LSR6332?"

    None.
    And there you have it!!

  6. #6
    Member
    Join Date
    Sep 2014
    Location
    Las Cruces, NM
    Posts
    62
    LSR6332 at 1 meter standing vertical and on a 13inch stand about two foot from rear wall. No EQ.
    Attached Images Attached Images

  7. #7
    Senior Señor boputnam's Avatar
    Join Date
    Apr 2003
    Location
    northern california
    Posts
    6,995

    Re: Re: Re: difference between LSR32 and LSR6332

    Originally posted by JuniorJBL
    And there you have it!!
    No, there you have Giskard...
    bo

    "Indeed, not!!"

  8. #8
    Member
    Join Date
    Sep 2014
    Location
    Las Cruces, NM
    Posts
    62
    My bad for the PDF file. Redone as JPG. Expanded the vert. scale. This was a one position measurement at one meter, no EQ.
    Attached Images Attached Images  

  9. #9
    Junior Member
    Join Date
    Oct 2016
    Location
    montreal
    Posts
    5
    Quote Originally Posted by johnlcnm View Post
    My bad for the PDF file. Redone as JPG. Expanded the vert. scale. This was a one position measurement at one meter, no EQ.
    thanks
    I have retook measurements and everything now measure flat

    I think the issue might have been from the angle of the mic

    false alarm!

  10. #10
    Junior Member
    Join Date
    Apr 2004
    Posts
    3
    Just wanted to let you guys know that I now have a pair of each and they both sound awesome. Dvd audio and sacd is going to ruin my life......or my bank account.

  11. #11
    Senior Member Valentin's Avatar
    Join Date
    Apr 2003
    Location
    Mexico
    Posts
    719

    JBL response lsr 6332

    There are two main changes to this device. The first change is basically the look of the product, the boxes have changed as far as the way they look but they function the same as the old boxes. The second change is the "Room Mode Compensation" that is available on the new product but not on the first version. That is to say if you need to place these boxes near flat surfaces that might interact with the waves coming out of the box, you can adjust for this with the DIP switches on the back of the units.

    There is another factor at this stage of this products life. It is referred to as "cost reduction". Our engineers and manufacturing people put their heads together and figure out ways of reducing the cost of production without changing the quality of sound that comes from the device. I believe this is what has happened to the tweeter. The tweeter for the original unit lists for $122 each, the newer device lists for $86. These devices many not be interchangeable between versions but will function identically in use.
    If you look at the schematics for both networks, they are identical. The reason there are two part numbers is the silk screening on the back of units. Aside from that, they are the same.

    Hope this clears things up for you.

    Dave Wheeler
    JBL PRO

  12. #12
    Member
    Join Date
    Sep 2014
    Location
    Las Cruces, NM
    Posts
    62
    The 6332/32s are really exceptional speakers, in my mind. The mids are flat and the bass is really clean and clear for a 12 inch driver. I do operate them in my room at -1db above 4K. Don't believe the 32s had that strapping option on the back. But a treble tone control or EQ should work if you feel the need.---- I sure miss the tone controls on the old equipment.

    Regards,

    John

  13. #13
    Dis Member mikebake's Avatar
    Join Date
    Apr 2003
    Location
    Lima, Ohio, USA
    Posts
    2,626
    Hi Dave;
    thanks for weighing in, and for your help when people call!!! Look forward to your future contributions here.


    MBB

  14. #14
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    14,875
    Actually, I doubt he knows his emails are being posted on the Internet...

    I do like his answer though

    I think it's time to get a pair of these loudspeakers with the intent of eventually going 5.1

  15. #15
    Dis Member mikebake's Avatar
    Join Date
    Apr 2003
    Location
    Lima, Ohio, USA
    Posts
    2,626
    Oh, I didn't get that; I thought Dave was Valentin. Doh!
    Well, if you see a deal on some sometime, maybe that's the way I oughtta go, too. I need to get a little simpler on this stuff!!!!!
    MBB

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •