Results 1 to 5 of 5

Thread: L112 Midrange wires

  1. #1
    Junior Member
    Join Date
    Nov 2007
    Location
    Anaheim, CA
    Posts
    10

    L112 Midrange wires

    I need to remove the midrange wires in one L112 cabinet. The wires go through a hole drilled in the back of the driver chamber, which is sealed with what looks like hot melt glue. Any ideas on how to remove the glue so I can pul the wires? I thought of applying heat with a heat gun, but I am afraid of damaging the wires. Any thoughts would be appreciated

    Thanks,

    Ozzie

  2. #2
    Senior Member
    Join Date
    Apr 2003
    Location
    Winnipeg Manitoba Canada
    Posts
    2,300
    Quote Originally Posted by Ozzie Fior View Post
    I need to remove the midrange wires in one L112 cabinet. The wires go through a hole drilled in the back of the driver chamber, which is sealed with what looks like hot melt glue. Any ideas on how to remove the glue so I can pul the wires? I thought of applying heat with a heat gun, but I am afraid of damaging the wires. Any thoughts would be appreciated

    Thanks,

    Ozzie
    Well maybe you should leave this to a JBL certified tech.

  3. #3
    Junior Member
    Join Date
    Nov 2007
    Location
    Anaheim, CA
    Posts
    10
    Well, I see these networks including the wires sold all the time, so I would suspect someone knows how to do this

  4. #4
    Senior Member
    Join Date
    Apr 2003
    Location
    Winnipeg Manitoba Canada
    Posts
    2,300
    Yes well they yank the whole mess out of the sub-chamber and then seperate the wires from the latex sealent.

  5. #5
    Junior Member
    Join Date
    Nov 2007
    Location
    Anaheim, CA
    Posts
    10
    Thanks John. My thought is to carefully cut the glue along the opening. I will install those wires in a new enclosure, so the glue "plug" that remains areound the wires can stay there and help seal the new subchamber. Just curious about any learned lessons out there.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. L88P question
    By JBLRaiser in forum Lansing Product Technical Help
    Replies: 15
    Last Post: 12-05-2008, 04:56 AM
  2. L112 midrange screws
    By chuck in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 04-05-2007, 02:38 AM
  3. L112 Polarity Phase in HT help needed
    By brutal in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 03-28-2007, 08:36 PM
  4. What internal wires to use on a 4343
    By porschedpm in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 04-19-2005, 04:57 PM
  5. 2 types of L112 crossovers
    By dblaxter in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 03-13-2005, 01:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •