Results 1 to 9 of 9

Thread: Help needed for speaker upgrade.

  1. #1
    Senior Member fotodan's Avatar
    Join Date
    Feb 2007
    Location
    Wytheville, Va.
    Posts
    182

    Help needed for speaker upgrade.

    Due to my age and downsizing, I am going to sell my vintage 70's equipment along with my 4435's due to thier size. I will be going with surround amp, but wanting a smaller speaker that I can carry by myself, without going overboard in the $ department. Thinking about 4410's
    or 4408's any other options you all might think of??
    Thanks in advance.

  2. #2
    RE: Member when? subwoof's Avatar
    Join Date
    Aug 2003
    Location
    fingerlakes region, NY
    Posts
    1,899

    3 ways

    the 12" 3 ways tend to work better - and the 4410 / 4412 are the same size box.

    What are your (now) size limitations??

    sub

  3. #3
    Senior Member BMWCCA's Avatar
    Join Date
    Feb 2006
    Location
    Virginia
    Posts
    7,756
    If you'll accept the opinion of a neophyte: I have a pair of 4412As that I play next to a pair of L5s and swap back and forth. I've convinced myself I like the L5s better. According the the spec sheets, the L5 is only seven-pounds heavier shipping weight than the 4412A. It's actually a bit easier to carry since it seems that's something you consider important. At a common selling price of under $300 a pair, the L5 might be something you'd be interested in auditioning, if you can get over the black finish! At least it's better than the vinyl veneer of the 4408/4410/4412A series. But then you probably want the wood finish of the non-A 4410/12 series anyway.

    I don't even consider the dollar-value when I'm A-B'ing my JBLs, since I paid under $200 for the 4412As, $200 for the L5s, $200 for the L7s. The L5 is an outstanding, under-appreciated bargain. You could use some L1s for rears in your surround system as a good match, they're not very pricey, either.

    That all being said, I can't imagine you won't regret the 4435s and I'm sorry to hear they'll have to go.

    L20t
    L112
    4412A
    L5
    L7
    L150A
    L26
    030/C37/C35

  4. #4
    Senior Member Fred Sanford's Avatar
    Join Date
    Jun 2005
    Location
    Shenandoah Valley
    Posts
    1,608
    I think it's obvious that you need to take a road trip to the C'Ville/H'burg area, and you can audition BMWCCA's stuff and my 4333As/L100s/L110s/L46s/HP420s/etc.

    I was wondering when we'd hear from you again, hope you're doing well. I was still considering a Wytheville road trip, we'll see if that pans out. Let me know if you've still got some cymbal stands kicking around, I may be handing some of mine down to a friend's kid & I'll need to pick up a few.

    I had the 4408s for a while, and liked them for their size. The 035Tis were a touch brighter than my L100s and L46s, not quite the extension on the 2405s in the 4333As. Different but not so much better than the 033s in my L110s, to my ears. Much easier to find & replace if they blow, though.

    je

  5. #5
    Senior Member SMKSoundPro's Avatar
    Join Date
    Apr 2005
    Location
    Anchorage, Alaska
    Posts
    1,019
    I have said it before...

    I really do appreciate the sound of my L110's.

    Very nice to my ears. Nice size and scale.

    Are you sure this is what you want to do, is it need to do?

    Scotty.
    One step above: "Two Tin Cans and a String!"
    Longtime Alaskan Low-Fi Guy - E=MC² ±3db

  6. #6
    Senior Member fotodan's Avatar
    Join Date
    Feb 2007
    Location
    Wytheville, Va.
    Posts
    182
    Quote Originally Posted by SMKSoundPro View Post
    I have said it before...

    I really do appreciate the sound of my L110's.

    Very nice to my ears. Nice size and scale.

    Are you sure this is what you want to do, is it need to do?

    Scotty.

    Not what I want to do Scotty, but GOD they are big and HEAVY. I have them mounted on casters, but still hard to move and lift if I ever have to relocate.

  7. #7
    Senior Member fotodan's Avatar
    Join Date
    Feb 2007
    Location
    Wytheville, Va.
    Posts
    182
    Quote Originally Posted by Fred Sanford View Post
    I think it's obvious that you need to take a road trip to the C'Ville/H'burg area, and you can audition BMWCCA's stuff and my 4333As/L100s/L110s/L46s/HP420s/etc.

    I was wondering when we'd hear from you again, hope you're doing well. I was still considering a Wytheville road trip, we'll see if that pans out. Let me know if you've still got some cymbal stands kicking around, I may be handing some of mine down to a friend's kid & I'll need to pick up a few.

    I had the 4408s for a while, and liked them for their size. The 035Tis were a touch brighter than my L100s and L46s, not quite the extension on the 2405s in the 4333As. Different but not so much better than the 033s in my L110s, to my ears. Much easier to find & replace if they blow, though.

    je
    Hey JE, been busy with the store and now 2 different web sites. Not much time to even listen to music. Still have the stands upstairs in the closet. If you feel the need for road trip let me know..

  8. #8
    Senior Member BMWCCA's Avatar
    Join Date
    Feb 2006
    Location
    Virginia
    Posts
    7,756
    Quote Originally Posted by fotodan View Post
    I have them mounted on casters, but still hard to move and lift if I ever have to relocate.
    They probably won't let them in the geriatric condominium anyway!

    You need help moving them, we'll all pile in a car and come help you move them! Enjoy 'em while you've got 'em.

  9. #9
    Senior Member Fred Sanford's Avatar
    Join Date
    Jun 2005
    Location
    Shenandoah Valley
    Posts
    1,608
    Quote Originally Posted by fotodan View Post
    Hey JE, been busy with the store and now 2 different web sites. Not much time to even listen to music. Still have the stands upstairs in the closet. If you feel the need for road trip let me know..
    My wife's taking the dogs & heading to FLA to visit her Mom some time late in July, I may head your way during that span of time, I'll let you know. PM me with an e-mail address or contact info if you want, pretty sure I have your shop's info somewhere.

    je

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. N1200 Crossover Upgrade - ??
    By alcerritelli in forum Lansing Product Technical Help
    Replies: 8
    Last Post: 06-04-2008, 05:46 AM
  2. L300 internal wiring help needed.
    By Steve K in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 04-29-2007, 06:47 PM
  3. L250 -> 250Ti Upgrade and Differences
    By jblnut in forum Lansing Product Technical Help
    Replies: 46
    Last Post: 04-22-2005, 02:29 AM
  4. Looking for Upgrade Suggestions for 2235/2445 2-way
    By GarMan in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 03-23-2005, 02:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •