Dear LH,
I just received a pair of SR4735a 3way speakers in trade and have very little experience with them. They are in rough shape, and will need some simple repairs to polish them back up.
In looking at the pdf: http://www.jblproservice.com/pdf/SR-Series/SR4735A.pdf
I see where these use a 2226G, 2119h and 2417/ 2371 horn combo.
1. The 2226g are whole and seem good to go.
2. The 2119: one reconed with new 2119h kit with shiny black cone; other 2119h original grey paper cone, very thin cone, very fragile feeling. (Needs new recone kit to match other 2119)
3. Both 2417 dia's appear new, untested & unmolested. One crossthreaded 6x32 screw for dia. Need to re-tap the 2417 hole.
4. 2371 horns - One horn fine shape. Other horn flare all busted up on the corners.
5. Need some of the stacking corner protectors as all on the bottoms are gone.
Looks like these two cabinets took a topple in the back of the dj's box van as he was usually DUI on his way home from the gig.
Comment: I also have a pair of SR4718a that these '35's can sit on and make a classic Sr package.
Any experience with these boxes is greatly appreciated. Also Biamp or triamp recommendations.