4344mk2 cross over

[caladois]

I contact you as soon as possible. I will try this month.

[spirou38]

I contact you as soon as possible. I will try this month.

You should hurry up because just a little bit than 1 day is left before the end of this month

Pascal

[unlimitedquest]

Hi, is there anybody able to enlight about the recommended " official " crossover frequency to use when you go active bi-amping with the 4344 MK2 ?

[JeffW]

You might find some info here

http://www.lansingheritage.org/html/...7-4344mkii.htm

[grumpy]

or even here :

http://manuals.harman.com/JBL/HOM/Te...4MkII%20ts.pdf

Tech Sheet indicates 340Hz, but I assume that's "as implemented passively" as opposed
to what you might need/want to set for biamping to approximate the voltage drive
... appears to be a 12dB/oct-ish roll off.

[Fangio]

Here's another useful link with some discussion:
http://www.audioheritage.org/vbullet...-Mk-II-network

Not sure also if that 340Hz is written in stone when you go active. 250-350Hz, depending on the crossover model is suitable for my 3145 networks.

Glad to hear from you.

Happy B-Day Caladois.