Results 1 to 11 of 11

Thread: LX5 replacement parts needed

  1. #1
    Member qcautosports's Avatar
    Join Date
    Apr 2007
    Location
    Burbank ,Ca.
    Posts
    36

    LX5 replacement parts needed

    Is it possible to replace the old, and tired internals of an LX5 using modern day parts? Need help badly. Thanks.

  2. #2
    Dang. Amateur speakerdave's Avatar
    Join Date
    May 2003
    Location
    Northern California
    Posts
    3,734
    Not entirely. I believe the innards are buried in some icky stuff. The schematic is available, but you will need to reuse the tapped inductor and also measure the DCR of the other inductors, if any.

    David

  3. #3
    Member qcautosports's Avatar
    Join Date
    Apr 2007
    Location
    Burbank ,Ca.
    Posts
    36
    Quote Originally Posted by speakerdave View Post
    Not entirely. I believe the innards are buried in some icky stuff. The schematic is available, but you will need to reuse the tapped inductor and also measure the DCR of the other inductors, if any.

    David
    What can we do about that buried stuff?

  4. #4
    Dang. Amateur speakerdave's Avatar
    Join Date
    May 2003
    Location
    Northern California
    Posts
    3,734
    Quote Originally Posted by qcautosports View Post
    What can we do about that buried stuff?
    Who's this "we"?

  5. #5
    RE: Member when? subwoof's Avatar
    Join Date
    Aug 2003
    Location
    fingerlakes region, NY
    Posts
    1,899

    search and ye shall find

    the "icky stuff" is wax and there are a few threads that explain how-to...

    sub

  6. #6
    Member qcautosports's Avatar
    Join Date
    Apr 2007
    Location
    Burbank ,Ca.
    Posts
    36
    Quote Originally Posted by speakerdave View Post
    Who's this "we"?
    Me and my Pop.

  7. #7
    Member qcautosports's Avatar
    Join Date
    Apr 2007
    Location
    Burbank ,Ca.
    Posts
    36
    Quote Originally Posted by qcautosports View Post
    Is it possible to replace the old, and tired internals of an LX5 using modern day parts? Need help badly. Thanks.
    Bump

  8. #8
    RE: Member when? subwoof's Avatar
    Join Date
    Aug 2003
    Location
    fingerlakes region, NY
    Posts
    1,899

    parts and pieces

    Just what parts do you need?

    Are yours non-functional?

    Did you look up the schematic on this site?

    The parts are available from a number of suppliers except for the special tapped inductors and rotary switch.

    You should use the search function to gauge a project before asking for assistance - this way your request can be narrowed down and easier to respond.


  9. #9
    Member qcautosports's Avatar
    Join Date
    Apr 2007
    Location
    Burbank ,Ca.
    Posts
    36
    Quote Originally Posted by subwoof View Post
    Just what parts do you need?

    Are yours non-functional?

    Did you look up the schematic on this site?

    The parts are available from a number of suppliers except for the special tapped inductors and rotary switch.

    You should use the search function to gauge a project before asking for assistance - this way your request can be narrowed down and easier to respond.

    Yes they are both woking. Just planning to overhaul...like refreshing an old engine.

  10. #10
    Junior Member
    Join Date
    Feb 2016
    Location
    Vancouver BC
    Posts
    3

    LX5 Replacement Parts

    Hi

    I too am looking to build a replacement LX5 with modern parts and I was wondering how you made out with the tapped inductor. Did you ever manage to find a replacement ?

    Thanks

  11. #11
    Member qcautosports's Avatar
    Join Date
    Apr 2007
    Location
    Burbank ,Ca.
    Posts
    36
    Quote Originally Posted by ndmunro View Post
    Hi

    I too am looking to build a replacement LX5 with modern parts and I was wondering how you made out with the tapped inductor. Did you ever manage to find a replacement ?

    Thanks
    I think the best wiuld be to build a new one. New coils, new caps. [
    ---::: Pioneer PL71/Empire 999 ev/x/ GE RPX Mono/ Scott Type 299C/ Pioneer CS88A :::---

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. vintage parts needed for model 275 driver circa 1953
    By storyteller in forum Lansing Product Technical Help
    Replies: 7
    Last Post: 03-13-2004, 07:59 PM
  2. 811B parts needed
    By 69SG in forum Lansing Product General Information
    Replies: 1
    Last Post: 01-12-2004, 07:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •