+ Reply to Thread
Results 1 to 3 of 3

Thread: Is it worth it to rebuild an old JBL cabinet...?

  1. #1
    Junior Member
    Join Date
    Jul 2003
    Posts
    5

    Is it worth it to rebuild an old JBL cabinet...?

    Hi all!

    I've been thinking about a nice project to spend a couple of months with.

    I own a pair of Danish made JBL LX-66 speakers. I like their sound, and would like to make them even better.

    On further examination, I found the cabinet to be one of the weakest I've ever seen. It's not even made out of MDF - it's just particleboard. There's no bracing inside.

    The speakers have 2 8" woofers and have quite a lot of bass. I'd assume such a weak cabinet, combined with so much bass power, is not exactly a recipe for uncoloured sound.

    My plans are to build a new, heavily braced 1" MDF cabinet in the shape of the L-250 JBL speaker, and use the original crossover and drivers for the LX-66, while mantaining internal volume constant.

    I calculated the internal volume of the LX-66 as being 107L. Then, after measuring the 4" port on the back, I arrived at a 40 Hz tuning point.

    I'd also like to drop said tuning point at least 5 Hz. My goal would be having a 30 Hz tuning point, at the expense of efficiency. I always thought the speakers were a bit underdamped, anyway.

    Do you think this would be a worthy project? I don't know - the 26Ti tweeter is not recognized as one of the best, and the original speaker is in good shape. I'd like to build it because I got a new low power tube amp, and think the JBL's would be ideal (with their high efficiency rating - around 94 dBs!).

    Also, I've been looking for the T/S parameters for the 408G woofer driver, but haven't been able to find it, so I can't determine the speakers' response after re-tuning the cabinet, so I'll have to test them by ear.

    Any opinions will be very welcome!
    Last edited by fjhuerta; 03-20-2004 at 09:13 AM.
    Javier Huerta

  2. #2
    Senior Member GordonW's Avatar
    Join Date
    May 2003
    Location
    Marietta/Moultrie GA USA
    Posts
    1,454
    My only qualm with this idea, is that there may be some crossover re-tuning (ie, changing of values, etc) needed, to compensate for the change in baffle shape and size. The response of the woofer and mid will probably change, just a bit.

    However, really... the advantages of making a REALLY SOLID, quiet (from an acoustical "ringing" of the cabinet standpoint) cabinet, probably will outweigh the negatives. I've never seen a case, where a MORE rigid cabinet DIDN'T improve sonics.

    As for tuning- no reason not to try the lower Fb. Just be sure and leave yourself the option of going back to the factory tuning, or something intermediate between factory and the initial lower Fb you test- don't glue or otherwise fasten the port tube into the box, until you're SURE you have it where you like it. Some of the "underdamped" behaviour, may be more the "box talk" from the wimpy box structure, than an inherent woofer tuning issue... so make sure you're not wedding yourself prematurely, to a change that may not need to be made.

    Regards,
    Gordon.
    This Is Gordon's Page: www.geocities.com/gordonwaters

  3. #3
    Junior Member
    Join Date
    Jul 2003
    Posts
    5
    Gordon, thanks for your help!

    I changed my mind. For the sake of simplicity, I'll be building the cabinet in a rectangular shape, so I guess the crossover re-tuning won't be so necessary (building a pyramid-shaped speaker takes a lot of effort).

    As for the tuning, I'll start with 30 Hz and work my way upwards... I intend to keep the original cabinet handy, in case something goes wrong.

    Thanks again!

    Javier.
    Javier Huerta

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. JBL D123 12'' cabinet size?
    By vifa32144 in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 05-04-2004, 07:00 PM
  2. new jbl cabinet
    By jorrit bierma in forum Lansing Product General Information
    Replies: 1
    Last Post: 07-06-2003, 02:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts