Hi.
Does any of you nordic members know about a veneering supplier in Norway/Sweden/Denmark?
Preferably Norway.
-Tim
Hi.
Does any of you nordic members know about a veneering supplier in Norway/Sweden/Denmark?
Preferably Norway.
-Tim
2213 + 2435HPL w/aquaplas + H9800 (Matsj edition)
How much do you need ?
mats
I have no idea yet.
Im just asking in general. Want to buy a small quantity to learn how do to it first. Or find out that Im not capable
-Tim
2213 + 2435HPL w/aquaplas + H9800 (Matsj edition)
Although from Germany:
http://www.modulor.de/shop/oxid.php/...K/tpl/-/lang/1
Decoflex veneer
worldwide shipping.
What do you understand small quantity? I could send you something.
I did it for my Hartsfields and can you give tips for processing.
http://www.audioheritage.org/vbullet...ad.php?t=19677
regards
juergen
Hi RS237. Yes it is indeed the Decoflex that have caught my attention and i don't have a problem with ordering from Germany.
I'm just wondering if there is any shops closer to me
By small quantity i mean just enough so i can try to get cornerjoints to look ok.
-Tim
2213 + 2435HPL w/aquaplas + H9800 (Matsj edition)
Tim,
buy yourself a 6mm router and a small trimmer bit with a 6mm shank . ( Trend 46/07X1/4TC )trimmer bit ref number
the iron on paper backed veneer is very simple to use.
Rich
Last edited by richluvsound; 01-25-2008 at 05:57 AM. Reason: added info
Thanks for the advice Rich. I will check it out.
-Tim
2213 + 2435HPL w/aquaplas + H9800 (Matsj edition)
I have 1000m2 so i can send a "sample".
mats
Thanks Mats. That would be great. If you have some cutoff you are not going to use i would appreciate.
-Tim
2213 + 2435HPL w/aquaplas + H9800 (Matsj edition)
If this enough PM me your address.
regards
juergen
Jurgen. That is perfect. Sending you PM.
-Tim
2213 + 2435HPL w/aquaplas + H9800 (Matsj edition)
If you go to this link ---- http://www.audioheritage.org/vbullet...ackyard&page=6 and follow from post 79 you can see how I did it first time. Its not the only way but it worked for me.
Best of luck.
Thanks. That was really great. Nice cabinet you got there.
-Tim
2213 + 2435HPL w/aquaplas + H9800 (Matsj edition)
Hello Tim
I prefer the ironing method. Rick Riessen has explained them very well.
http://www.audioheritage.org/vbullet...ad.php?t=18218
look post 8.
regards
juergen
There are currently 1 users browsing this thread. (0 members and 1 guests)