This is the crossover I have come up with for my 4430 project. It basically came from the JBL 4430 schematic and Zilches info on the "4430 HELP!" thread, and the parts list there.
My plan is to split the high frequency circuit from the low frequency circuit and use double binding posts for Bi wire/Biamp, and jumpers for single wire use.
I am not the most crossover savvy person in the world, but can follow a "recipe" fairly well. Just wanted to make sure this is as simple as it looks and I am not overlooking something that will prevent it from working as intended. Also, it will allow me to eliminate the switch that Zilch used, as I cant figure out how to wire it anyway! Any feedback much appreciated here.
Russellc