Hi there, I've been lurking on these boards for quite some time.
Were in the process of building a new house and with that a dedicated HT room. (see attachment)
The room is L 6.4 x W 5.0 x H 2.8 Meters
At this time I have Klipsch RF-83 and RC-64 as LCR and will use those when the HT is completed, but for a future upgrade I've been looking for DiY plans for home theater LCR's.
I'd like to build an active two way system (or three ? ). Zilch's Mega system caught my attention.
http://www.audioheritage.org/vbullet...&postcount=419
I'm thinking of using the
JBL 2352 horn
http://www.usspeaker.com/jbl%202352-1.htm
2435HPL Compression driver.
From sub x-over (50-80hz) to horn x-over (800-1200) I was considering two Usher 15HM. Two of these placed horizontally below the horn. Seperate enclosures.
http://www.partsexpress.com/pe/showd...number=296-630
In the front of the room I will be building a false wall which can house the horn and seperate box(es) for the LF drivers. The LF boxes and the horn can be positioned by making a holdingshelf between the studs of the false wall, so the LCR's will be flush mounted in the false wall so to speak. The three front speakers will be positioned in ear level height with the perforated screen covering at least the center monitor. The front of the wall will be covered by acoustic panels and the unused cavity can be filled with fiberglass for bass trapping.
So is this viable, the 2352 horn + compression driver, Usher LF driver, behringer electronic crossover and one amp for each lf and hf for each of the three monitors?
Reply With Quote