Results 1 to 12 of 12

Thread: how to replace tweeters for JBL 250 jubilee

  1. #1
    Junior Member
    Join Date
    Dec 2007
    Location
    Sweden
    Posts
    10

    how to replace tweeters for JBL 250 jubilee

    Hi guys
    I'm totally lost when it comes to replace my damaged tweeters of my 250ti Jubilee. I tried to remove the plastic front bit it's totally impossible to remove it. I tried to warm it up a bit because I heard it could be stucked with double-glue tape or something. I can probably use some violence but then the plastic cap would get damaged.

    Anyone having inputs on this? I'm desperate now :-)

    Thanks
    Martin

  2. #2
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    8,202
    Here a PDF of the cabinet. Also is what the raw tweeter looks like. ? There is an adhesive ring holding the tweeter faceplate on. Have you tried contacting JBL?

    Rob
    Attached Images Attached Images   

  3. #3
    Junior Member
    Join Date
    Dec 2007
    Location
    Sweden
    Posts
    10
    Quote Originally Posted by Robh3606 View Post
    Here a PDF of the cabinet. Also is what the raw tweeter looks like. ? There is an adhesive ring holding the tweeter faceplate on. Have you tried contacting JBL?

    Rob
    Thanks Rob for your input.

    Yes, this is exactly how they look like. Mine are in gold too. I can only see the center part of mine because I haven't been able to remove the plastic ring yet which is adhesived and impossible to remove. And that's where I'm stucked.

  4. #4
    Senior Member greyhound's Avatar
    Join Date
    Dec 2006
    Location
    netherlands
    Posts
    284
    plastic ring?
    where

    be carefull and contact your local jbl dealer. they will cost you a lot if you make a fatal error.

    are you sure its plastic and not metal
    mine have a ring also but its metal, gold coloured to hide the screws.
    is this what you are talking about?

    because i have them and im not using them
    it will be cheap to send over. and youll only pay for the stamps

    and a place for me to sleap when im in your country
    finally i have a pair of 604 8g's....there not easy to find in the netherlands

  5. #5
    Junior Member
    Join Date
    Dec 2007
    Location
    Sweden
    Posts
    10
    Quote Originally Posted by greyhound View Post
    plastic ring?
    where

    be carefull and contact your local jbl dealer. they will cost you a lot if you make a fatal error.

    are you sure its plastic and not metal
    mine have a ring also but its metal, gold coloured to hide the screws.
    is this what you are talking about?

    because i have them and im not using them
    it will be cheap to send over. and youll only pay for the stamps

    and a place for me to sleap when im in your country
    You would be more than welcome to crash at my place :-)

    I knew this would be hard to explain so I try to do it again
    See attached picture as well.
    My problem is that I can't access the gold metal thing where the screws are so I can remove the whole thing. You see where i point my finger, that plate is stucked. So what shall I do to remove it?
    Attached Images Attached Images  

  6. #6
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    8,202
    Oh boy!!! You should really try to contact a JBL dealer. You could definately get it off but it could be in pieces when you are done. It would be good if you knew if they had replacement trim rings. You can easilly make coverplates for them from sheet metal stock but you really want the trim rings. Mine came with no rings so I made covers for mine. The part number is Item 29 on the list

    Sorry can't give you more help.

    Rob
    Attached Images Attached Images   

  7. #7
    Senior Member greyhound's Avatar
    Join Date
    Dec 2006
    Location
    netherlands
    Posts
    284
    oops that a little bit different than i had in mind.
    its probably clipped into it. you know with plastic hooks.
    maybe some duck tape and just pull. try it on only one side , first left or right and also up or down
    whats broken anyway. why are you replacing them.

    tweetersd cost 220 euro a piece trust me i know so be carefull.
    again my advice woulsd be to contact a dealer.

    Maybe guido (member) knows. he knows a lot about jbl drivers.
    finally i have a pair of 604 8g's....there not easy to find in the netherlands

  8. #8
    Junior Member
    Join Date
    Dec 2007
    Location
    Sweden
    Posts
    10

    membrane

    I managed to remove the shield and now I know what I need. I need two of these golden plate with the tweeter (membranes) (see picture) because they are broken. Anyone having an idea where to find? I spoke to my JBl dealer in Sweden and they could only sell a complete set with the magnet and all = more expensive.

    So where can I find just these membranes?

    Best
    Martin
    Attached Images Attached Images  

  9. #9
    Senior Member greyhound's Avatar
    Join Date
    Dec 2006
    Location
    netherlands
    Posts
    284
    unfortunatly i can tell you that you will NOT!!! find these membranes.
    im 100% sure of it.

    ive tried it for more than a year.
    if you want to solve this problem using membranes You can use the 050TI, 052TI, and maybe , maybe the 035TI.
    but there all silvercoloured domes. re-doming them would be a realy difficult job.

    sorry mate suck it up and buy the new tweeters. 500 euro

    for a nice (not mindblowingly good) tweeter.

    id go for a 050TI for 120 euro's.(a pair, inc posting) exactly the same.
    orange county speaker parts or something sells them and will send overseas. just google for a while

    in my case they would fall out of place since my whole speaker is gold.
    finally i have a pair of 604 8g's....there not easy to find in the netherlands

  10. #10
    Junior Member
    Join Date
    Dec 2007
    Location
    Sweden
    Posts
    10
    Quote Originally Posted by greyhound View Post
    unfortunatly i can tell you that you will NOT!!! find these membranes.
    im 100% sure of it.

    ive tried it for more than a year.
    if you want to solve this problem using membranes You can use the 050TI, 052TI, and maybe , maybe the 035TI.
    but there all silvercoloured domes. re-doming them would be a realy difficult job.

    sorry mate suck it up and buy the new tweeters. 500 euro

    for a nice (not mindblowingly good) tweeter.

    id go for a 050TI for 120 euro's.(a pair, inc posting) exactly the same.
    orange county speaker parts or something sells them and will send overseas. just google for a while

    in my case they would fall out of place since my whole speaker is gold.
    thanks for the input.
    what strucks me is that on the back of the magnet it says 050TI. does this mean that they have the original tweeter or have they been replaced once with cheaper 050TI. or is 050TI the original ones? because you say those costs 120 a pair and new tweeter costs 500??
    i get a it confused now :-)

  11. #11
    Senior Member Jakob's Avatar
    Join Date
    Apr 2003
    Location
    Sweden
    Posts
    311
    Hej!

    Tråkigt med dina diskanter. Mitt tips, om du inte redan har gjort det, är att höra med Olle eller Jonathan på LN högtalarservice i Göteborg. Dom är auktoriserade på JBL sen länge och är mycket duktiga! Dom kanske kan hjälpa dig.

    Forum members: Sorry for the swedish, just made a recommendation about what company in Sweden to call to get help.

  12. #12
    Senior Member greyhound's Avatar
    Join Date
    Dec 2006
    Location
    netherlands
    Posts
    284
    Quote Originally Posted by kalle303 View Post
    thanks for the input.
    what strucks me is that on the back of the magnet it says 050TI. does this mean that they have the original tweeter or have they been replaced once with cheaper 050TI. or is 050TI the original ones? because you say those costs 120 a pair and new tweeter costs 500??
    i get a it confused now :-)

    ive come across normal 050TI tweeters for 120 dollar (105 euro)
    they are the same (soundwise) as the 050gold tweeter that cost 500 dollar.
    looking at your pic. I can see that you dont have the 050 gold tweeter in there but a 050Ti with a gold coloured membrane.

    so if I were you. id try to buy the 050Ti to replace yor tweeters.
    the membrane will be zilvercoloured but that will be the ONLY difference.
    trust me on this

    if you realy want to replace the tweeters with a gold coloured dome it will cost you a lot.
    i'd only do that if your planning on selling them.
    finally i have a pair of 604 8g's....there not easy to find in the netherlands

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replace LE20 tweet with 034 tweeters
    By John K in forum Lansing Product General Information
    Replies: 0
    Last Post: 09-21-2006, 10:02 AM
  2. Use of 035Ti Tweeters to Replace Le-25 Le-25-2 or Le 25-4's
    By lgvenable in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 10-25-2005, 09:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •