Need to find out which JBL 12" driver to use.

[spkrman57]

The project is a 150hz Edgarhorn (tractix) that has a throat of 6.5" x 6.5" and what I'm looking for is a pair of 12" drivers that are similiar to the 2227 or 2220 (15" type) as far as parameters are concerned.

Also, they must be "obtainable" to me!

I can't remember if there was a 12" version of the 2227 as that would be my best prospect. Low Qts, high effeciency, a light cone and large magnet would be the essential parameters.

Any and all comments welcome!

Regards, Ron

[Earl K]

Ron,

- The 2020H 12" has the modern 1/2" top-plate like the 2227H .
- Hugely powerful magnetic system . Specs are online at JBL Pro .

- These used to be easily obtained through dealers / though I suspect this speaker is close to retirement ( or has been already ) .
- Like the 2227 it has a rising response which should work well inside a horn .

[speakerdave]

. . . . Also, they must be "obtainable" to me! . . . .

I would try the 2202H

David

[spkrman57]

Ron,

- The 2020H 12" has the modern 1/2" top-plate like the 2227H .
- Hugely powerful magnetic system . Specs are online at JBL Pro .

- These used to be easily obtained through dealers / though I suspect this speaker is close to retirement ( or has been already ) .
- Like the 2227 it has a rising response which should work well inside a horn .

With Qts of .23 and eff of 103db/watt it sounds like a good deal if I find a pair somewhere!

Any idea of price??? Could not find pricelist on JBLpro.com!

Thanks, Ron

[spkrman57]

I never can seem to find the prices on anything on the site.

I can find T/S parameters and such, just no pricing.

Someone help out the slow-witted one(ME) on this!

Thanks, Ron

[johnaec]

Could not find pricelist on JBLpro.com!

Far from complete - mainly seems for drivers used OEM, as compared to discrete components: http://www.jblproservice.com/pdf/Tra...cer%20List.pdf

John