Results 1 to 4 of 4

Thread: L100t crossovers-- difference?

  1. #1
    Junior Member
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    14

    L100t crossovers-- difference?

    Here are two photos of different crossovers from L100t's listed on eBay today. I was wondering if someone knows if there are any significant differences between them and which would be considered "better"...

    http://cgi.ebay.com/JBL-L100T-L100-T...ayphotohosting



    http://cgi.ebay.com/JBL-L100T-Crosso...ayphotohosting


    Thanks,
    Steve

  2. #2
    Senior Member lgvenable's Avatar
    Join Date
    Apr 2005
    Location
    Broken Arrow OK
    Posts
    553

    L100T x-overs

    I don't know the difference between these you show.

    But some of the audio engineers on the forum would tell you that the L100T3 x-overs are much better than the L100t's. I have 3 sets of L100T's and am in the process of building new L100T3 x-overs; as these are supposed to give much better response musically.

    Larry
    Integra DHC80.1,3x 4636LF, 2360-2446J 2404H,12 x 8340 Surrounds, 2 x4645B, BGW 250D's,250E's,& 750B's 16 amps...7600 watts

  3. #3
    Junior Member
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    14
    I have heard that the t3 crossovers are better also. I have a pair of 100ts and a pair of 20ts. Maybe when I notice some deterioration in sound, I may attempt to replace the crossovers with a t3 equivalent. I have never been unhappy with these speakers as they are, so even though I have also heard t3s are superior, I haven't had the urge to attempt a rebuild. When you are done, let us know how it turned out.
    I have seen several L100t crossovers as those in the top picture. I have not comeacross those like the ones on the bottom and that piqued my curiousity.

  4. #4
    Senior Member Don C's Avatar
    Join Date
    Apr 2003
    Location
    Santa Rosa CA
    Posts
    1,722
    They are both probably L100T crossovers. Early and late versions. JBL reserves the right to change specifications without notice.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. L100T crossover Capacitor Upgrade
    By L100t Owner in forum Lansing Product DIY Forum
    Replies: 35
    Last Post: 10-29-2010, 06:35 PM
  2. L100T vs L100T3
    By duaneage in forum Lansing Product Technical Help
    Replies: 54
    Last Post: 09-18-2009, 03:40 PM
  3. Replies: 30
    Last Post: 05-04-2006, 08:07 PM
  4. Difference in 4311/L100 Crossovers?
    By cary in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 12-02-2003, 10:52 AM
  5. Can 250TI BQ crossovers be used on 250TI's?
    By Ezel in forum Lansing Product Technical Help
    Replies: 7
    Last Post: 05-12-2003, 08:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •