Results 1 to 15 of 35

Thread: 2405 UHF Clones

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    May 2005
    Location
    Bristow, VA
    Posts
    36

    2405 UHF Clones

    I bought a pair of Acoustician 1205 slot UHF drivers off eBay a while back. The seller said that these were manufactured to be clones of the JBL 2405 (or 077) slot driver. There is virtually nothing on the net about Acoustician drivers, let alone the 1205.

    Does anyone know something about this driver?

    Attached Images Attached Images    

  2. #2
    Moderator hjames's Avatar
    Join Date
    Nov 2005
    Location
    NoVA - DC 'burbs
    Posts
    8,548
    umm, If they aren't JBLs (and they aren't) just assume they are cheap clones??

    Acoustician doesn't return any "brand info" in the first 6 pages

    http://www.google.com/search?hl=en&q...an&btnG=Search



    Quote Originally Posted by witoman View Post
    I bought a pair of Acoustician 1205 slot UHF drivers off eBay a while back. The seller said that these were manufactured to be clones of the JBL 2405 (or 077) slot driver. There is virtually nothing on the net about Acoustician drivers, let alone the 1205.

    Does anyone know something about this driver?

    2ch: WiiM Pro; Topping E30 II DAC; Oppo, Acurus RL-11, Acurus A200, JBL Dynamics Project - Offline: L212-TwinStack, VonSchweikert VR-4
    7: TIVO, Oppo BDP103D, B&K, 2pr UREI 809A, TF600, JBL B460

  3. #3
    Senior Member louped garouv's Avatar
    Join Date
    Jun 2004
    Location
    formerly "the city where imagination takes precedence over fact"
    Posts
    2,152
    fostex made some really nice ring radiator clones.....

    maybe these are nice too?

    hard to tell via photo IMO

  4. #4
    Member KromeDome's Avatar
    Join Date
    Jun 2007
    Location
    Downeast Maine
    Posts
    43

    Thumbs down ...well at least the rubber magnet tires are nice

    I bought a pair of these a long time ago that were brand new and sold as "non-working". They both tested as a dead short, so I opened them up to check out why. As expected, it turned out that both were so thrown together that all four lugs from the clone diaphragms were jammed against the magnet assembly. While I had them apart, I noticed that the throat casting was not symmetrical, and that the phase plug was off center in relation to it by quite a bit. Now I have never had genuine 2405s apart, but I assume that the phase plug sits firmly in the center of a symmetrical throat.

    I tested them after fixing the shorts, got some sound, and put them away where they have been sitting now for 12-13 years. I do remember being pretty disgusted by the whole experience. For fun, I'll dig them out and take a couple of photos of the internals if I get some spare time in the next couple of days.

    Quote Originally Posted by witoman View Post
    I bought a pair of Acoustician 1205 slot UHF drivers off eBay a while back. The seller said that these were manufactured to be clones of the JBL 2405 (or 077) slot driver. There is virtually nothing on the net about Acoustician drivers, let alone the 1205.

    Does anyone know something about this driver?

  5. #5
    Member
    Join Date
    May 2005
    Location
    Bristow, VA
    Posts
    36
    Thanks, that would be interesting.

  6. #6
    Member
    Join Date
    May 2005
    Location
    Bristow, VA
    Posts
    36
    I would especially like to know is if the 2405 diaphragm kit, D16R2405, could be used in this driver.

  7. #7
    Member KromeDome's Avatar
    Join Date
    Jun 2007
    Location
    Downeast Maine
    Posts
    43

    Here a couple of the bell...

    A couple of different angles to see the asymmetry of the casting.
    Attached Images Attached Images   

  8. #8
    Member KromeDome's Avatar
    Join Date
    Jun 2007
    Location
    Downeast Maine
    Posts
    43

    just the diaphragm

    The mylar looks black in these shots, but is actually silver.
    Attached Images Attached Images   

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2405 Diaphragma -blue- from my 4333A
    By Toms Studio in forum Lansing Product General Information
    Replies: 6
    Last Post: 04-21-2007, 09:47 AM
  2. 2405 or 077
    By Uncle Paul in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 02-28-2005, 11:40 AM
  3. 2405 seals
    By majick47 in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 12-19-2004, 10:28 PM
  4. Diaphragma 075 the same as 2405 Alnico?
    By Dieter in forum Lansing Product General Information
    Replies: 7
    Last Post: 06-19-2003, 11:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •