- A DCR of 8.8 ohms implies a nominal AC impedance of @ 11-12 ohms ( somewhere on the curve ) / though it's a certainty that a Z of 16 ohms will be reached at some point on the curve.
- FWIW, JBL referred to this woofer as an 8 ohm driver / while a similar or identical voice-coil as found in the le15a was referenced as 16 ohm .
- As mentioned , I'd go with 12 ohms as my starting reference "Z" (for transposing values of an exisitng crossover ) . This means multiplying existing coil values ( on the LF section ) by 1.5 and multiplying capacitor values by .6667 ( the reciprocal of 1.5 ) .