Just got a pair of 4312A's. Hooked them up, and sounded great. However, at higher volumes, one of them sounds like the woofer was blown. Makes a terrible rattling sound. Decided before I bought a new woofer, I would swap them from side to side. Both looked great. Hooked everything back up. SAME problem in the same speaker. Could it be a crossover?
Is the internal speaker wire dangling so that it comes in contact with the back of the woofer's cone?
Something loose in/on the cabinet (jack plate/midrange doghouse/port tube secured well)?
I had a tinneman clip wedged into the edge of a driver, stuck in the goop- but that sound would have moved with the woofer for you.
Good luck,
je
I'm going to pull the woofer again, and have a close look in the cabinet. Thanks!
Tube port was rattling against the back of the cabinet.
Thanks!
Thanks for reporting back, might help someone in the future...you know what to do now.
je
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
