I finally have time to play around the 4344. noticed that one channel is slightly louder than the others, so not able to get the exact center image... I started to adjust the 3 knobs on the front and noticed that some interesting points and need forum members's advise.
1. the reading on the 4344 foical is difference, I mean when I turn the knobs all the way up, it never go to the +6db marks on the foical, it only goes to the +5.5db, I think it just happen because when they glue the foical not really pay attention to the reading/mark.But one speaker's focial match exactly when tuning.
2. Since the READING is not the same on the speakers, I manually adjust the knobs to match the others. (e.g. left speaker is 0db (middle),right speaker turn to middle as well but READING is -0.5db )
3. If i do the step 2,means the SAME setting on both speakers, the RIGHT channel is slightly louder than the LEFT.
4. Once I adjust the knobs on the RIGHT speakers (means -2db on the knobs, )then I get the perfect /balance sound fr both speakers and able to create center image.
5. Speaker placement is very hard for the 4344, is that right?
Summary:
Queation:
**Is that normal to have different L-Pad adjustment on EACH speaker or must do as a PAIR??
**-2db on one channel to get the balance sound is acceptable?
Thanks for the helps.
Tom