Results 1 to 4 of 4

Thread: Goodmans 3-Way Crossovers 84118

  1. #1
    Junior Member
    Join Date
    Aug 2007
    Location
    Florida
    Posts
    23

    Goodmans 3-Way Crossovers 84118

    I acquired some old 3-way Goodmans Crossovers from a friend's estate last month. I have searched all over the internet for information on these crossovers and I can not find anything on them nor can I find anything remotely like them.

    Can anyone here shed some light on these old crossovers? How old are they and what are they worth?

    According to the label on them:

    Goodmans Crossover Network
    (Half Section)

    Type XO- 750/5000
    750 & 5000 cycles
    15 ohm

    Goodmans Industries Limited
    Wembley, England
    84118
    Last edited by KentGriffith; 09-04-2007 at 10:07 AM. Reason: more info

  2. #2
    Junior Member
    Join Date
    Aug 2007
    Location
    Florida
    Posts
    23

  3. #3
    Senior Member grumpy's Avatar
    Join Date
    Oct 2003
    Location
    SoCal
    Posts
    5,743
    no idea, but this was oddly coincidental:

    http://www.linkedin.com/pub/0/665/56B


    crossovers might be interesting to a UK speaker collectors, perhaps?
    They were around for a loooong time.

  4. #4
    sa660
    Guest

    Goodmans

    Goodmans was making a 3 way cinema/studio based on a 12" driver identical to the Vitavox (AK120) or westrex (30928) Probably all 3 were made at the same factory in england.
    A small compression driver very similar to the one used on the Jensen imperial KIT 31 and a compression driver tweeter with mylar diaphragm.
    A very good system from 50Hz to 15Khz.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 30
    Last Post: 05-04-2006, 08:07 PM
  2. Model 14 crossovers
    By mowntnbkr in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 09-07-2005, 05:23 PM
  3. Speaking of crossovers...
    By pmakres1 in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 04-25-2005, 04:56 AM
  4. Mastring Lab crossovers value?
    By Guy L in forum Lansing Product General Information
    Replies: 2
    Last Post: 12-18-2003, 07:26 AM
  5. Can 250TI BQ crossovers be used on 250TI's?
    By Ezel in forum Lansing Product Technical Help
    Replies: 7
    Last Post: 05-12-2003, 08:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •